P2403 Code: Meaning & Diagnostic Guide
EVAP System Leak Detection Pump Sense Circuit/Open
What does P2403 mean?
P2403 quick answer
P2403 is a generic powertrain code for an open or interrupted electrical circuit in the EVAP leak detection pump’s sense circuit. It does not, by itself, confirm that the pump has failed.
Is P2403 generic or manufacturer-specific?
P2403 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P2403 works in the vehicle
The EVAP system limits fuel-vapor emissions. The sense circuit carries an electrical signal related to the leak detection pump. “Open” means the circuit may not have a complete electrical path; the cause needs diagnosis.
P2403 symptoms
The check-engine light may be the only noticeable sign. Depending on the vehicle, there may also be an emissions-test failure or other EVAP-related symptoms, but none is confirmed by this code alone.
Possible causes of P2403
Possibilities include damaged or disconnected wiring, a poor connector contact, a circuit fault, or a problem with the pump or its sensing circuitry. Vehicle-specific testing is needed to identify the cause.
How to diagnose P2403
- Confirm P2403 with a scan tool and note any other stored codes and available freeze-frame data.
- Consult service information for the specific vehicle’s EVAP circuit and diagnostic procedure.
- With the vehicle powered down as specified by service information, inspect accessible wiring and connectors for damage, disconnection, corrosion, or poor contact.
- Have a qualified technician test circuit continuity and signals using the manufacturer’s procedure before replacing parts.
- After repairs, clear the code if appropriate and verify whether it returns under the specified test conditions.
How to fix P2403
Repair any verified wiring or connector fault, or replace a component only if testing identifies it as faulty. The code alone is not enough to justify replacing the leak detection pump. Follow vehicle-specific service information or consult a qualified technician.
Can I drive with P2403?
This code alone does not establish whether the vehicle is safe to drive. Check for other warning lights or drivability problems and follow the owner’s manual; seek professional advice if symptoms occur or the warning persists.
P2403 frequently asked questions
Does P2403 mean the EVAP pump has failed?
No. It identifies an open or interrupted pump sense circuit, which can result from wiring, connector, circuit, or component problems.
Can I diagnose P2403 by replacing the pump?
Replacement without testing may not fix the problem. First check the circuit and connectors according to vehicle-specific service information.
Will P2403 affect an emissions test?
It may prevent an emissions test from passing, depending on local rules and the vehicle’s readiness status. Confirm requirements with the testing authority.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.