Source-backed diagnostic reference

P2404 Code: Meaning & Diagnostic Guide

EVAP System Leak Detection Pump Sense Circuit Range/Performance

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2404 mean?

  • GENERIC: EVAP System Leak Detection Pump Sense Circuit Range/Performance Source
  • GENERIC: EVAP Leak Detection Pump Sense Circuit Range/Performance Source

P2404 quick answer

P2404 generally means the EVAP leak-detection pump sense circuit is reporting a signal outside the expected range or behavior. It identifies a circuit-performance issue, not a confirmed failed pump.

Is P2404 generic or manufacturer-specific?

P2404 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2404 works in the vehicle

The EVAP system limits fuel vapors escaping from the fuel system. The leak-detection pump helps check that system, and its sense circuit carries information used by the vehicle’s control system. P2404 points to an unexpected signal in that circuit; the code alone does not identify the cause.

P2404 symptoms

The check-engine light may be the only noticeable sign. Other symptoms, if present, vary by vehicle and may relate to an EVAP-system problem; the supplied code definition does not confirm any particular symptom.

Possible causes of P2404

Possible causes include a problem with the pump’s sense circuit, such as damaged wiring or a poor electrical connection, or an issue with the pump or related EVAP components. These are possibilities, not confirmed failures.

How to diagnose P2404

  1. Use a compatible scan tool to confirm P2404 and check for related codes.
  2. Review available freeze-frame data for the conditions when the code was set.
  3. Following vehicle-specific service information, inspect accessible wiring and connectors in the relevant circuit for damage or poor connections.
  4. Have the circuit and EVAP components tested using the manufacturer’s diagnostic procedure before replacing parts.

How to fix P2404

Choose a repair only after testing identifies the cause. Depending on the findings, this may involve repairing a connection or wiring, or addressing a verified component fault. Clear the code and confirm the repair using the appropriate procedure.

Can I drive with P2404?

P2404 alone does not establish whether a vehicle is safe or unsafe to drive. Check the owner’s manual and arrange diagnosis; if the vehicle runs poorly, a warning light flashes, or you notice a fuel smell, stop driving when safe and seek professional advice.

P2404 frequently asked questions

Does P2404 mean the leak-detection pump has failed?

No. It indicates an unexpected signal or performance in the pump sense circuit, but diagnosis is needed to identify the cause.

Can I clear P2404 without repairing anything?

A code can sometimes be cleared with a scan tool, but clearing it does not fix the underlying issue. Check whether it returns after proper diagnosis.

What does “range/performance” mean in P2404?

It means the circuit’s signal did not behave as expected. It does not, by itself, name a failed part.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.