Source-backed diagnostic reference

P2406 Code: Meaning & Diagnostic Guide

EVAP System Leak Detection Pump Sense Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2406 mean?

  • GENERIC: EVAP System Leak Detection Pump Sense Circuit High Source
  • GENERIC: EVAP System Leak Detection Pump Sense Circuit High Source

P2406 quick answer

P2406 is a generic diagnostic trouble code for “EVAP System Leak Detection Pump Sense Circuit High.” It indicates that the engine computer detected a higher-than-expected signal in the leak-detection pump’s sensing circuit; it does not, by itself, identify a failed part.

Is P2406 generic or manufacturer-specific?

P2406 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2406 works in the vehicle

The EVAP system limits fuel-vapor emissions. The leak-detection pump helps check the system for leaks, and its sense circuit reports information to the vehicle computer. “Circuit high” describes the detected electrical signal, not necessarily a high pressure or a confirmed pump failure. The exact test conditions can vary by vehicle.

P2406 symptoms

There may be no obvious driving symptoms. Depending on the vehicle and the reason the code was set, an emissions warning light or an emissions-test issue may occur.

Possible causes of P2406

Possible explanations include a problem with the pump or its sensing circuit, wiring or connector concerns, or another EVAP-system issue. The code alone does not confirm which, if any, is present.

How to diagnose P2406

  1. Confirm P2406 with a suitable scan tool and note any other codes and available freeze-frame information.
  2. Check the vehicle-specific service information for the code’s test conditions and diagnostic procedure.
  3. Inspect accessible EVAP pump wiring and connectors for visible damage, corrosion, or loose connections.
  4. Have the circuit and pump tested using the vehicle maker’s procedure before replacing parts.

How to fix P2406

Base repairs on test results and vehicle-specific service information. A wiring or connector repair, or repair of an EVAP component, may be appropriate if testing identifies the issue. Clear the code and verify the repair using the prescribed procedure.

Can I drive with P2406?

P2406 alone does not establish whether a vehicle is safe to drive. Check the owner’s manual and consider prompt diagnosis, especially if other warning lights or unusual symptoms are present. Do not attempt high-voltage repairs.

P2406 frequently asked questions

Does P2406 mean the leak-detection pump has failed?

No. It reports a high signal in the pump’s sensing circuit, but diagnosis is needed to determine the cause.

Can P2406 affect an emissions test?

It may, depending on local test rules and the vehicle’s readiness status. Check applicable requirements after diagnosis and repair.

Can I diagnose P2406 from the code alone?

No. The code is a starting point; vehicle-specific testing is needed to distinguish a component issue from a circuit or other EVAP-system concern.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.