Source-backed diagnostic reference

P240B Code: Meaning & Diagnostic Guide

EVAP System Leak Detection Pump Heater Control Circuit Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P240B mean?

  • GENERIC: EVAP System Leak Detection Pump Heater Control Circuit Low Source
  • GENERIC: EVAP System Leak Detection Pump Heater Control Circuit Low Source

P240B quick answer

P240B is a generic OBD-II code for an EVAP system leak detection pump heater control circuit that is registering a low electrical signal.

Is P240B generic or manufacturer-specific?

P240B has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P240B works in the vehicle

The EVAP system helps contain fuel vapors. This code points to the electrical control circuit for a heater associated with the leak detection pump; “circuit low” means the signal is below the expected range. The code alone does not identify the failed part.

P240B symptoms

The check-engine light may be the only noticeable sign. Other symptoms, if present, depend on the vehicle and the underlying cause.

Possible causes of P240B

Possible causes include an electrical connection or wiring problem, a fault in the heater or pump assembly, or an issue with its control circuit. The code by itself does not confirm any of these.

How to diagnose P240B

  1. Confirm the code with a scan tool and check for other stored codes and relevant freeze-frame information.
  2. Use service information for the specific vehicle to identify the circuit and its test procedures.
  3. With the vehicle powered down as specified by the service procedure, inspect accessible wiring and connectors for damage, corrosion, or poor connections.
  4. Have a qualified technician test the circuit and related components against vehicle specifications before replacing parts.

How to fix P240B

Repair should follow diagnosis for the specific vehicle. A technician may need to address wiring, a connection, a circuit-control issue, or a related component; do not replace parts based on the code alone. Avoid opening or repairing high-voltage systems.

Can I drive with P240B?

The code alone does not establish whether the vehicle is safe to drive. Check the owner’s manual and seek prompt professional advice if warning lights, drivability changes, fuel odors, or other concerning symptoms occur.

P240B frequently asked questions

What does P240B mean?

It indicates a low electrical signal in the EVAP leak detection pump heater control circuit.

Does P240B identify a failed pump?

No. It identifies a circuit condition, not a confirmed failed component. Vehicle-specific testing is needed.

Can I diagnose P240B from the code alone?

No. The code should be considered alongside other codes, vehicle information, and electrical test results.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.