Source-backed diagnostic reference

P2431 Code: Meaning & Diagnostic Guide

AIR System Air Flow/Pressure Sensor Circuit Range/Performance Bank 1

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2431 mean?

  • AUDI: Air control solenoid failure, Powertrain Control Module (PCM) failure, Secondary Air System pressure sensor failure, Wiring issue Source
  • GENERIC: AIR System Air Flow/Pressure Sensor Circuit Range/Performance Bank 1 Source
  • GENERIC: Secondary Air Injection System Air Flow/Pressure Sensor Circuit Source

P2431 quick answer

P2431 is a generic powertrain code indicating that the secondary air injection system’s air-flow or pressure sensor circuit for Bank 1 is reporting a value outside the expected range or performance.

Is P2431 generic or manufacturer-specific?

P2431 has a generic source-backed definition in this database, with additional manufacturer-labelled references for AUDI. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2431 works in the vehicle

The engine control system monitors a sensor signal related to secondary-air flow or pressure. “Range/performance” means the signal does not match what the system expects; it does not, by itself, identify a failed part.

P2431 symptoms

Depending on the vehicle and the underlying issue, the check-engine light may be the only sign. Other possible symptoms include changes in emissions-system operation or engine performance, but these are not established by the code alone.

Possible causes of P2431

Possible areas to investigate include the air-flow or pressure sensor circuit, its wiring or connections, the sensor itself, or an issue affecting secondary-air flow or pressure. P2431 alone does not confirm a cause or a failed component.

How to diagnose P2431

  1. Use a scan tool to confirm P2431 and check for other stored codes.
  2. Review freeze-frame data to see the conditions when the code was recorded.
  3. Inspect accessible sensor wiring and connectors for visible damage, corrosion, or loose connections.
  4. Have a qualified technician compare sensor readings and secondary-air system operation with the vehicle’s service information.
  5. Confirm the repair addresses the cause, then clear the code and check whether it returns.

How to fix P2431

Base repairs on test results and vehicle-specific service information. A sensor, wiring, connection, or secondary-air system issue may need attention, but replacing parts based only on P2431 can lead to an incorrect repair.

Can I drive with P2431?

The code alone does not establish whether the vehicle is safe to drive. Check the owner’s manual and arrange diagnosis; if the vehicle runs poorly, warning lights change, or other concerning symptoms appear, stop driving when safe and seek professional advice.

P2431 frequently asked questions

What does P2431 mean?

It indicates a range or performance concern in the Bank 1 secondary air injection air-flow or pressure sensor circuit.

Does P2431 prove the sensor has failed?

No. The code identifies a circuit or performance concern, not a confirmed failed component.

Can I diagnose P2431 from the code alone?

No. Scan data, wiring and connector checks, and vehicle-specific system tests are needed to identify the cause.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.