Source-backed diagnostic reference

P244B Code: Meaning & Diagnostic Guide

Particulate Filter Differential Pressure Too High Bank 1

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P244B mean?

  • GENERIC: Particulate Filter Differential Pressure Too High Bank 1 Source
  • GENERIC: Diesel Particulate Filter Differential Pressure Sensor Offset Source

P244B quick answer

P244B is a generic powertrain code associated with the diesel particulate filter (DPF) differential-pressure reading. Reference descriptions differ: one says pressure is too high on Bank 1, while another describes a differential-pressure sensor offset. The code alone does not confirm a failed sensor or blocked filter.

Is P244B generic or manufacturer-specific?

P244B has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P244B works in the vehicle

The DPF traps soot in the exhaust. A differential-pressure measurement compares pressure before and after the filter to help the vehicle assess exhaust restriction and filter condition. P244B indicates that this reading may be outside the expected range or offset, but the exact interpretation can depend on the vehicle and its diagnostic information.

P244B symptoms

Possible context includes a warning light, reduced engine performance, or changes in fuel use or exhaust-filter regeneration. Some vehicles may show no noticeable symptoms. These effects are not established by the code alone.

Possible causes of P244B

Possibilities include a pressure reading that is genuinely high, an inaccurate or offset sensor signal, or an issue affecting the sensor’s pressure connections or wiring. A DPF restriction may also be considered. Diagnosis is needed to distinguish among these possibilities.

How to diagnose P244B

  1. Check the vehicle-specific service information for the exact definition and test procedure for P244B.
  2. Record all stored and pending codes and review freeze-frame data before clearing anything.
  3. Have a qualified technician compare live differential-pressure readings with manufacturer specifications under the stated test conditions.
  4. Inspect the sensor circuit and pressure connections for visible damage, loose connections, or blockage, following vehicle-specific procedures.
  5. Use test results to determine whether further checks of the sensor, wiring, or DPF are appropriate.

How to fix P244B

Do not replace the sensor or DPF based on P244B alone. The repair depends on the confirmed cause and the vehicle’s service information. Ask a qualified technician to verify the pressure readings and related circuit or filter condition.

Can I drive with P244B?

The code alone does not establish whether it is safe to continue driving. Consult the vehicle manual and arrange diagnosis promptly, especially if a warning light is accompanied by reduced power, unusual exhaust behavior, or other warnings. Stop and seek assistance if the vehicle shows signs of a serious fault.

P244B frequently asked questions

What does P244B mean?

P244B is a generic powertrain code related to the DPF differential-pressure reading. Reference descriptions vary between pressure being too high and a sensor reading being offset.

Does P244B mean the DPF pressure sensor has failed?

No. The code does not confirm a failed sensor. A technician should check the signal, connections, wiring, and relevant DPF readings.

Can a blocked DPF cause P244B?

A DPF restriction is one possibility when a differential-pressure reading is high, but the code alone does not prove the filter is blocked.

Can I keep driving with P244B?

The code alone cannot determine whether continued driving is safe. Follow the vehicle manual and seek prompt diagnosis, particularly if performance changes or additional warnings appear.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.