P2467 Code: Meaning & Diagnostic Guide
Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 2 Sensor 3
What does P2467 mean?
P2467 quick answer
P2467 is a generic powertrain code for an exhaust gas temperature sensor circuit range or performance problem on Bank 2, Sensor 3. It indicates that the reading or circuit behavior is outside expected limits; it does not by itself identify a failed part.
Is P2467 generic or manufacturer-specific?
P2467 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P2467 works in the vehicle
The engine control module monitors exhaust gas temperature sensor signals. “Range or performance” means a signal may be implausible or not behaving as expected. Bank 2 is the engine bank opposite Bank 1, and Sensor 3 is a position label whose exact location depends on the vehicle.
P2467 symptoms
Possible symptoms include a check-engine light, reduced engine performance, or changes in emissions-system operation. Some vehicles may show no noticeable symptoms. The code alone does not confirm any of these effects.
Possible causes of P2467
Possible causes include a damaged or contaminated sensor, wiring or connector problems, exhaust leaks or abnormal exhaust temperatures, or an issue with the control module. Vehicle-specific information is needed to narrow these possibilities.
How to diagnose P2467
- Confirm the code and review any other stored codes and available freeze-frame data.
- Use vehicle-specific service information to locate Bank 2, Sensor 3 and check the expected signal range.
- Inspect the sensor, connector, and accessible wiring for damage, corrosion, loose connections, or heat exposure.
- Compare live sensor data with manufacturer specifications and check for related exhaust or emissions-system faults.
- Have a qualified technician perform further circuit testing if the cause is not clear.
How to fix P2467
Repair depends on the confirmed cause. A technician may need to address wiring or connector damage, an exhaust issue, or a sensor fault. Do not replace parts based on the code alone; use vehicle-specific diagnostic procedures.
Can I drive with P2467?
The code alone cannot determine whether continued driving is safe. Check the owner’s manual and seek prompt professional advice, especially if warning lights, reduced power, unusual smells, or other changes occur. Stop in a safe place if the vehicle shows signs of an immediate hazard.
P2467 frequently asked questions
Does P2467 mean the temperature sensor has failed?
No. It identifies a circuit range or performance concern, but the cause could also involve wiring, connections, exhaust conditions, or another system fault.
Where is Bank 2, Sensor 3?
Its location varies by engine and vehicle. Bank 2 is opposite Bank 1, and Sensor 3 is a manufacturer-defined sensor position; consult vehicle-specific service information.
Can I keep driving with P2467?
The code alone does not establish whether driving is safe. Consider other symptoms, follow the owner’s manual, and get the vehicle assessed if performance or warning indicators change.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.