Source-backed diagnostic reference

P247E Code: Meaning & Diagnostic Guide

Exhaust Gas Temperature Out of Range Bank 2 Sensor 3

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P247E mean?

  • GENERIC: Exhaust Gas Temperature Out of Range Bank 2 Sensor 3 Source
  • GENERIC: Exhaust Gas Temperature Out of Range Bank 2 Sensor 3 Source

P247E quick answer

P247E is a generic diagnostic trouble code meaning “Exhaust Gas Temperature Out of Range Bank 2 Sensor 3.” It indicates that the control system detected an exhaust-temperature reading outside its expected range; it does not, by itself, identify the cause.

Is P247E generic or manufacturer-specific?

P247E has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P247E works in the vehicle

An exhaust gas temperature sensor measures heat in the exhaust. “Bank 2” refers to the engine bank designated as bank 2, and “Sensor 3” identifies a sensor position defined for that vehicle. The code reports an out-of-range reading, not proof that the sensor has failed.

P247E symptoms

The code alone does not establish what symptoms, if any, will occur. Any warning lights, drivability changes, or other symptoms depend on the vehicle and the underlying cause.

Possible causes of P247E

Possible explanations may include a sensor reading or circuit issue, wiring or connector trouble, or an exhaust condition affecting the temperature reading. The supplied code description does not confirm a specific cause or failed component.

How to diagnose P247E

  1. Use a compatible scan tool to confirm P247E and check for other stored codes.
  2. Review available freeze-frame data, which records vehicle conditions when the code was set.
  3. Consult vehicle-specific service information to identify Bank 2 Sensor 3 and the expected readings.
  4. Have a qualified technician inspect the sensor circuit, wiring, connectors, and relevant exhaust conditions.
  5. Compare scan-tool readings with service specifications before deciding on a repair.

How to fix P247E

Base repairs on test results and vehicle-specific service information. Address any confirmed wiring, connector, sensor, or exhaust issue; do not replace a component based on P247E alone.

Can I drive with P247E?

The code description does not determine whether continued driving is safe. Check the vehicle’s owner guidance and consider prompt professional diagnosis, especially if warning lights, unusual behavior, or additional codes are present.

P247E frequently asked questions

What does P247E mean?

It means the system detected an exhaust gas temperature reading outside its expected range for Bank 2 Sensor 3.

Does P247E prove the temperature sensor is bad?

No. The code identifies an out-of-range reading, but diagnosis is needed to determine whether the sensor, its circuit, or another condition is responsible.

Can I drive with P247E?

The code alone cannot establish whether driving is safe. Follow vehicle-specific guidance and arrange diagnosis, particularly if the vehicle shows other warnings or symptoms.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.