Source-backed diagnostic reference

P2487 Code: Meaning & Diagnostic Guide

Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 5

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2487 mean?

  • GENERIC: Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 5 Source
  • GENERIC: Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 5 Source

P2487 quick answer

P2487 is a generic powertrain code for an exhaust gas temperature sensor circuit high on Bank 2, Sensor 5. It indicates the control module detected a signal higher than expected; it does not by itself confirm which part has failed.

Is P2487 generic or manufacturer-specific?

P2487 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2487 works in the vehicle

The code identifies a high electrical signal in the circuit associated with the Bank 2, Sensor 5 exhaust gas temperature sensor. Bank and sensor locations vary by engine and exhaust layout, so use vehicle-specific service information to identify the correct sensor.

P2487 symptoms

The code may appear with a warning light or other exhaust-system or engine-related codes. Driveability symptoms are not established by this code alone, and some vehicles may show no noticeable change.

Possible causes of P2487

Possible explanations include a damaged or corroded connector or wiring, a sensor problem, or an issue elsewhere in the circuit. The code alone does not establish a failed component.

How to diagnose P2487

  1. Record all stored codes and available freeze-frame information before clearing anything.
  2. Use vehicle-specific service information to locate Bank 2, Sensor 5 and identify the circuit.
  3. With the vehicle safely parked and the exhaust cool, visually check accessible wiring and connectors for damage, corrosion, looseness, or contact with hot exhaust parts.
  4. Have a qualified technician test the sensor circuit against the vehicle's specifications and check for related codes before replacing parts.

How to fix P2487

Repair or replace only the wiring, connector, sensor, or other circuit component confirmed faulty by testing. Follow vehicle-specific service procedures; this code alone is not enough to justify replacing the sensor.

Can I drive with P2487?

The code alone does not determine whether the vehicle is safe to drive. Check the owner's manual and consider professional diagnosis promptly, especially if warning lights, reduced power, unusual exhaust behavior, or other symptoms are present. Stop in a safe place if the vehicle develops serious drivability problems.

P2487 frequently asked questions

What does P2487 mean?

It indicates a high signal in the exhaust gas temperature sensor circuit identified as Bank 2, Sensor 5.

Does P2487 prove the sensor is bad?

No. Wiring, connectors, the sensor, or another part of the circuit may be involved; testing is needed to identify the cause.

Where is Bank 2, Sensor 5?

Its location depends on the engine and exhaust layout. Consult service information for the specific vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.