P2488 Code: Meaning & Diagnostic Guide
Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 2 Sensor 5
What does P2488 mean?
P2488 quick answer
P2488 generally means the engine computer detected an exhaust gas temperature sensor circuit reading or behavior outside the expected range for Bank 2, Sensor 5. It does not by itself confirm that the sensor has failed.
Is P2488 generic or manufacturer-specific?
P2488 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P2488 works in the vehicle
The code refers to the exhaust gas temperature (EGT) sensor circuit associated with Bank 2, Sensor 5. “Range/performance” means the signal did not behave as expected; the cause could be the sensor, its wiring or connections, or another issue affecting the reading. Sensor numbering and location can vary by vehicle.
P2488 symptoms
Some vehicles may show a check-engine light, reduced performance, or changes in exhaust or emissions-system operation. There may be no obvious driving symptoms. These possibilities are not specific to every vehicle with P2488.
Possible causes of P2488
Possible causes include an EGT sensor problem, damaged or loose wiring or connectors, corrosion, or an exhaust-system condition affecting the reading. Vehicle-specific diagnosis is needed to identify the cause.
How to diagnose P2488
- Use a scan tool to confirm P2488 and check for other related codes.
- Record freeze-frame data, which captures vehicle conditions when the code was set.
- Consult vehicle-specific service information to identify Bank 2, Sensor 5 and the correct test procedure.
- With the exhaust cool, check accessible sensor wiring and connectors for visible damage, looseness, or corrosion.
- Have a qualified technician test the circuit and sensor against the vehicle's specifications before replacing parts.
How to fix P2488
Repair depends on the test results. A technician may need to address a wiring or connection issue, replace a confirmed faulty sensor, or investigate another condition affecting the reading. Clear the code only after repairs, then verify whether it returns.
Can I drive with P2488?
P2488 alone does not establish whether a vehicle is safe to drive. Check the owner's manual and seek professional advice, especially if warning lights are accompanied by poor performance, unusual exhaust behavior, or other symptoms. Stop driving if the vehicle shows signs of an immediate hazard.
P2488 frequently asked questions
Does P2488 mean the exhaust gas temperature sensor is bad?
No. It indicates an out-of-range or unexpected circuit reading, but diagnosis is needed to distinguish a sensor fault from wiring, connection, or other issues.
Where is Bank 2, Sensor 5?
Its location depends on the vehicle's engine and exhaust layout. Use vehicle-specific service information rather than assuming a universal location.
Can I keep driving with P2488?
The code alone cannot determine whether driving is appropriate. Consider other symptoms and warning lights, consult the owner's manual, and get vehicle-specific advice.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.