Source-backed diagnostic reference

P24AB Code: Meaning & Diagnostic Guide

EGR Cooler Coolant Pump Stuck On

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P24AB mean?

  • GENERIC: EGR Cooler Coolant Pump Stuck On Source
  • GENERIC: EGR Cooler Coolant Pump Stuck On Source

P24AB quick answer

P24AB is a generic diagnostic trouble code described as “EGR Cooler Coolant Pump Stuck On.” It indicates the control system detected the EGR cooler coolant pump running when it was not expected to; the code alone does not confirm which part has failed.

Is P24AB generic or manufacturer-specific?

P24AB has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P24AB works in the vehicle

EGR means exhaust gas recirculation. The EGR cooler transfers heat from recirculated exhaust gas to coolant, and its pump circulates that coolant. “Stuck on” describes the detected operating condition, not necessarily a confirmed pump failure.

P24AB symptoms

Depending on the vehicle and the underlying cause, there may be a warning light, unusual pump operation, or cooling-related symptoms. Some vehicles may show no obvious symptoms.

Possible causes of P24AB

Possible causes include a pump that continues running, a wiring or connector problem, a control-circuit issue, or a fault in how the system detects pump operation. Further testing is needed to distinguish among them.

How to diagnose P24AB

  1. Record P24AB and any other stored codes and freeze-frame information before clearing codes.
  2. Check the vehicle-specific service information for the code description and test procedure.
  3. Have a qualified technician inspect the pump connector and related wiring for damage, loose connections, or corrosion.
  4. Use appropriate scan-tool tests and circuit checks to determine whether the pump is being commanded on and whether its operation matches the command.

How to fix P24AB

Repair should follow the results of vehicle-specific testing. Do not replace the pump based on P24AB alone; a wiring, connector, control, or detection issue may also be involved. Use a qualified repair professional if diagnosis requires electrical testing.

Can I drive with P24AB?

P24AB alone does not establish whether a vehicle is safe to drive. Follow any vehicle warnings and monitor for overheating or other abnormal behavior. If a temperature warning appears or the vehicle overheats, stop in a safe place and seek assistance.

P24AB frequently asked questions

Does P24AB prove the EGR cooler coolant pump has failed?

No. It reports a detected stuck-on condition, but diagnosis is needed to confirm the cause.

Can a wiring problem trigger P24AB?

Yes. Wiring or connector faults are among the possibilities and should be checked alongside the pump and its controls.

Can I keep driving with P24AB?

The code alone cannot determine that. Consider other warnings and symptoms, and stop safely if the vehicle overheats.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.