Source-backed diagnostic reference

P24F5 Code: Meaning & Diagnostic Guide

NOx Sensor Delayed Response - High to Low Bank 1 Sensor 2

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P24F5 mean?

  • GENERIC: NOx Sensor Delayed Response - High to Low Bank 1 Sensor 2 Source
  • GENERIC: NOx Sensor Delayed Response - High to Low Bank 1 Sensor 2 Source

P24F5 quick answer

P24F5 is a generic diagnostic trouble code for a delayed high-to-low response from the Bank 1 Sensor 2 NOx sensor. It describes what the control system detected; it does not by itself confirm that the sensor has failed.

Is P24F5 generic or manufacturer-specific?

P24F5 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P24F5 works in the vehicle

A NOx sensor measures nitrogen oxides in the exhaust. “High to low” describes the response direction being monitored, while “delayed response” means the change took longer than expected. Bank 1 is the engine bank containing cylinder 1. Sensor locations and system designs vary, so check vehicle-specific service information to identify Sensor 2.

P24F5 symptoms

Possible signs may include an illuminated check-engine light, an emissions-system warning, or changes in drivability or fuel use. Some vehicles may show no noticeable symptoms. The code alone does not establish which symptoms, if any, are present.

Possible causes of P24F5

Possible causes include a NOx sensor that is slow or inaccurate, a wiring or connector problem, an exhaust leak or unusual exhaust conditions, or another issue affecting the emissions-control system. These are possibilities, not confirmed causes for this code.

How to diagnose P24F5

  1. Record all stored and pending codes and freeze-frame data before clearing anything.
  2. Use vehicle-specific service information to confirm the meaning and location of Bank 1 Sensor 2 for the vehicle.
  3. Check the sensor wiring and connectors for visible damage, corrosion, looseness, or contamination.
  4. Have a qualified technician check for exhaust leaks and compare NOx sensor readings with the vehicle’s diagnostic specifications.
  5. Use the results and any related codes to identify the cause before replacing parts.

How to fix P24F5

The correct repair depends on diagnosis. A sensor replacement may be appropriate if testing confirms it is faulty, but wiring, exhaust, or related system issues may need attention instead. Follow the vehicle maker’s service procedures or consult a qualified technician; do not attempt high-voltage system repairs.

Can I drive with P24F5?

P24F5 alone does not establish whether it is safe to drive. Check the owner’s manual and consider prompt professional diagnosis, especially if warning lights, poor running, or other unusual symptoms occur. Stop and seek assistance if the vehicle shows a serious warning or becomes unsafe to operate.

P24F5 frequently asked questions

Does P24F5 mean the NOx sensor has failed?

No. It reports a delayed sensor response, but diagnosis is needed to determine whether the sensor or another part of the system is responsible.

What does Bank 1 Sensor 2 mean?

Bank 1 is the engine bank containing cylinder 1. Sensor 2 identifies a sensor position in the emissions system; confirm its exact location using vehicle-specific service information.

Can I clear P24F5 without repairing anything?

Clearing the code does not fix its cause. Record diagnostic information first, then have the issue checked; the code may return if the underlying condition remains.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.