Source-backed diagnostic reference

P2602 Code: Meaning & Diagnostic Guide

Coolant Pump A Control Circuit Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2602 mean?

  • GENERIC: Coolant Pump A Control Circuit Low Source
  • GENERIC: Coolant Pump Control Circuit Open Source

P2602 quick answer

P2602 is a generic coolant pump control-circuit code. Reference descriptions differ: one says the circuit is low, while another says it is open. The code alone does not confirm that the pump has failed.

Is P2602 generic or manufacturer-specific?

P2602 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2602 works in the vehicle

The control circuit is the wiring and electronic controls used to command or monitor a coolant pump. “Low” generally means the circuit signal or voltage is lower than expected; “open” generally means the electrical path may be interrupted. The exact interpretation depends on the vehicle and its diagnostic information.

P2602 symptoms

Possible signs include a coolant-temperature warning, unusual temperature readings, or overheating if coolant circulation is affected. Some vehicles may show a warning light or no obvious symptom. These signs are not specific to P2602.

Possible causes of P2602

Possibilities include a wiring or connector problem, a control or power-supply issue, or a coolant pump problem. The code does not identify which component, if any, has failed.

How to diagnose P2602

  1. Check the vehicle’s service information for the exact P2602 definition and diagnostic procedure; descriptions can vary.
  2. Read all stored codes and relevant freeze-frame data before clearing anything.
  3. Have a qualified technician inspect accessible pump wiring and connectors for damage, corrosion, or a loose connection.
  4. Test the circuit and pump using the vehicle-specific procedure before deciding what needs repair.
  5. If the vehicle has high-voltage components, leave those systems and any related repairs to a qualified technician.

How to fix P2602

Base repairs on test results rather than replacing the pump based on P2602 alone. A confirmed wiring, connector, power-supply, control, or pump fault may require repair or replacement. Follow vehicle-specific service information.

Can I drive with P2602?

P2602 alone does not establish whether driving is safe. If the vehicle shows an overheating warning, temperature rises abnormally, or coolant-related warnings appear, stop when safe and seek assistance. Otherwise, consult the vehicle manual or a qualified technician about continued driving.

P2602 frequently asked questions

Does P2602 mean the coolant pump is bad?

No. It identifies a coolant pump control-circuit issue, but the cause may be in the wiring, connectors, controls, power supply, or pump.

Why do references describe P2602 differently?

The supplied generic references use “circuit low” and “circuit open.” Check vehicle-specific service information to determine the intended definition and test procedure.

Can I keep driving with P2602?

The code alone cannot determine that. Follow the vehicle’s warnings and manual; stop when safe if overheating or abnormal temperature warnings occur.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.