Source-backed diagnostic reference

P2614 Code: Meaning & Diagnostic Guide

Camshaft A Position Signal Output Circuit/Open Bank 1

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2614 mean?

  • AUDI: Broken tone ring, Camshaft Position Sensor (CMP) failure, Powertrain Control Module (PCM) failure, Wiring issue Source
  • GENERIC: Camshaft A Position Signal Output Circuit/Open Bank 1 Source
  • GENERIC: Camshaft Position Output Circuit/Open Source

P2614 quick answer

P2614 generally means the camshaft position output signal circuit is open or has an electrical fault. The exact meaning and diagnostic procedure can vary by vehicle.

Is P2614 generic or manufacturer-specific?

P2614 has a generic source-backed definition in this database, with additional manufacturer-labelled references for AUDI. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2614 works in the vehicle

The camshaft position sensor (CMP) provides information about camshaft position. An “open circuit” means the signal path may be interrupted or not behaving as expected; P2614 alone does not identify a failed part.

P2614 symptoms

Symptoms are not specified by the code reference and may vary. Depending on the vehicle and the underlying issue, the engine may run poorly or have difficulty starting, or the code may appear without obvious symptoms.

Possible causes of P2614

Possible causes depend on the vehicle. A manufacturer-specific reference lists a damaged tone ring, CMP sensor failure, wiring issues, or PCM failure; these are possibilities, not confirmed faults for every vehicle.

How to diagnose P2614

  1. Confirm the code with a scan tool and check for other stored codes and relevant freeze-frame data.
  2. Look up the P2614 definition and test procedure for the vehicle’s exact year, make, model, and engine.
  3. Have a qualified technician inspect the relevant wiring and connectors for damage, poor connections, or corrosion.
  4. Test the camshaft position signal and related components using the vehicle-specific service procedure before replacing parts.
  5. Clear the code only after diagnosis or repair, then verify whether it returns.

How to fix P2614

Repair should address the fault confirmed by testing. Depending on the vehicle, this could involve wiring or connector repair, or replacement of a verified faulty component. Do not replace the sensor or PCM based on the code alone.

Can I drive with P2614?

P2614 alone does not establish whether a vehicle is safe to drive. If the engine runs poorly, stalls, is difficult to start, or other warnings appear, limit driving and arrange prompt inspection. Follow the vehicle manual and seek professional advice if unsure.

P2614 frequently asked questions

What does P2614 mean?

It generally indicates an open or faulty camshaft position output signal circuit. The vehicle-specific definition may differ.

Does P2614 prove the camshaft position sensor has failed?

No. Wiring, connectors, the tone ring, the sensor, or other vehicle-specific issues may be considered, but diagnosis is needed to identify the cause.

Can I drive with P2614?

The code alone cannot determine whether driving is safe. Consider the vehicle’s symptoms and have it inspected, especially if it runs poorly or stalls.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.