Source-backed diagnostic reference

P261E Code: Meaning & Diagnostic Guide

Coolant Pump B Control Circuit Stuck On

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P261E mean?

  • GENERIC: Coolant Pump B Control Circuit Stuck On Source
  • GENERIC: Coolant Pump B Control Circuit Stuck On Source

P261E quick answer

P261E is a generic OBD-II code meaning “Coolant Pump B Control Circuit Stuck On.” It indicates that the engine control system detected the pump’s control circuit remaining on when it was not expected to.

Is P261E generic or manufacturer-specific?

P261E has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P261E works in the vehicle

“Control circuit” means the electrical path and controls used to command the coolant pump. “Stuck on” describes the detected circuit behavior; the code alone does not identify a failed part or confirm that the pump itself is faulty. Vehicle-specific service information is needed to identify what “Pump B” refers to.

P261E symptoms

Possible signs include an engine-temperature warning, unusual coolant-pump operation, or overheating. A vehicle may show no obvious symptoms. These are possibilities, not symptoms established by the code alone.

Possible causes of P261E

Possible causes include a wiring or connector problem, a control-circuit fault, or an issue with the pump or its control. The code does not confirm which, if any, of these is present.

How to diagnose P261E

  1. Record P261E and any other stored codes, along with available freeze-frame data.
  2. Use vehicle-specific service information to identify Coolant Pump B and the expected circuit behavior.
  3. Check relevant wiring and connectors for visible damage, corrosion, or loose connections.
  4. Have the circuit and pump operation tested using the manufacturer’s diagnostic procedure and suitable equipment.
  5. Recheck for codes after any confirmed fault is repaired.

How to fix P261E

Repair should follow the test results and vehicle-specific procedures. Address the confirmed wiring, control, or pump issue rather than replacing parts based on P261E alone. Seek help from a qualified technician if diagnosis requires electrical testing.

Can I drive with P261E?

P261E alone does not establish whether a vehicle is safe to drive. If the engine overheats or a temperature warning appears, stop safely and follow the owner’s manual; continuing to drive while overheating can cause damage. If there are no warnings or temperature problems, arrange diagnosis promptly and follow vehicle-specific guidance.

P261E frequently asked questions

What does P261E mean?

It is a generic code for “Coolant Pump B Control Circuit Stuck On,” meaning the control circuit was detected as remaining on unexpectedly.

Does P261E prove the coolant pump has failed?

No. The code describes detected circuit behavior and does not by itself identify a failed component.

Can I drive with P261E?

The code alone cannot determine drivability. Treat overheating or a temperature warning as urgent, and consult the owner’s manual or a qualified technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.