Source-backed diagnostic reference

P2667 Code: Meaning & Diagnostic Guide

Fuel Shutoff Valve B Control Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2667 mean?

  • GENERIC: Fuel Shutoff Valve B Control Circuit High Source
  • GENERIC: Fuel Shutoff Valve B Control Circuit High Source

P2667 quick answer

P2667 is a generic diagnostic trouble code meaning “Fuel Shutoff Valve B Control Circuit High.” It indicates that the engine control system detected a higher-than-expected electrical signal in the control circuit for fuel shutoff valve B; it does not by itself identify a failed part.

Is P2667 generic or manufacturer-specific?

P2667 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2667 works in the vehicle

“Control circuit high” describes an electrical reading above the expected range, not necessarily high fuel pressure or a confirmed valve failure. The exact circuit design and test conditions can vary by vehicle, so use vehicle-specific service information to interpret the code.

P2667 symptoms

Depending on the vehicle and the underlying issue, there may be a warning light, difficulty starting, stalling, or other fuel-system or engine-running concerns. Some vehicles may show few noticeable symptoms.

Possible causes of P2667

Possible explanations include a wiring or connector problem, an electrical fault involving the valve circuit, or an issue with the valve or its control. These are possibilities, not confirmed causes; the code alone cannot identify which applies.

How to diagnose P2667

  1. Record P2667 and any other stored codes and freeze-frame data before clearing anything.
  2. Consult service information for the specific vehicle to locate valve B and confirm the circuit description and test procedure.
  3. With the vehicle safely powered down as directed by its service information, visually check accessible wiring and connectors for damage, corrosion, looseness, or contamination.
  4. Have the circuit and valve tested using the manufacturer’s procedure and appropriate equipment; compare readings with vehicle-specific specifications.
  5. Recheck for codes and confirm the repair under the conditions that originally triggered the code.

How to fix P2667

Repair or replace only the component or wiring confirmed faulty by testing. Because P2667 does not prove that the valve itself has failed, avoid replacing parts based on the code alone. Seek a qualified technician if vehicle-specific circuit testing is needed.

Can I drive with P2667?

The code alone does not establish whether the vehicle is safe to drive. If it stalls, is difficult to start, runs poorly, or displays other serious warnings, stop driving when it is safe to do so and arrange an inspection. Otherwise, consult the vehicle’s owner information or a technician for advice specific to the symptoms.

P2667 frequently asked questions

What does P2667 mean?

P2667 is a generic code for “Fuel Shutoff Valve B Control Circuit High,” indicating an electrical signal in that control circuit was higher than expected.

Does P2667 mean the fuel shutoff valve has failed?

No. The code points to a circuit condition and does not confirm that the valve is faulty. Wiring, connectors, the valve, or its control may need to be checked.

Can I keep driving with P2667?

The code alone cannot determine drivability or safety. Consider the vehicle’s symptoms, and seek inspection promptly if it stalls, runs poorly, or has trouble starting.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.