Source-backed diagnostic reference

P267B Code: Meaning & Diagnostic Guide

B Rocker Arm Actuator Position Sensor Circuit Range/Performance Bank 2

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P267B mean?

  • GENERIC: B Rocker Arm Actuator Position Sensor Circuit Range/Performance Bank 2 Source
  • GENERIC: B Rocker Arm Actuator Position Sensor Circuit Range/Performance Bank 2 Source

P267B quick answer

P267B is a generic powertrain code for “B Rocker Arm Actuator Position Sensor Circuit Range/Performance, Bank 2.” It means the engine computer detected a signal or reported position that was outside expected limits or did not perform as expected. The code alone does not identify a failed part.

Is P267B generic or manufacturer-specific?

P267B has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P267B works in the vehicle

A rocker arm actuator system can change valve operation. The position sensor reports the actuator’s position to the engine computer. “Bank 2” refers to the engine bank identified as bank 2 by the vehicle manufacturer; “B” identifies a particular actuator or circuit designation. The exact layout and meaning can vary by vehicle.

P267B symptoms

Possible signs, depending on the vehicle and underlying issue, include a check-engine light, rough running, reduced performance, or changes in fuel economy. Some vehicles may show no obvious symptoms. These are possibilities, not confirmed effects of this code.

Possible causes of P267B

Potential causes to investigate include an electrical connection or wiring problem, an actuator or position-sensing issue, a mechanical problem in the variable-valve system, or a control-module or calibration concern. P267B by itself does not confirm any of these.

How to diagnose P267B

  1. Confirm the code with a compatible scan tool and record any other codes and available freeze-frame information.
  2. Use service information for the exact year, make, model, and engine to identify bank 2 and the “B” actuator circuit.
  3. Check for applicable vehicle-specific diagnostic updates and follow the manufacturer’s test procedure.
  4. Inspect accessible wiring and connectors for damage, corrosion, looseness, or contamination.
  5. Have a qualified technician compare actuator commands and position-sensor readings with vehicle-specific specifications before replacing parts.

How to fix P267B

Base repairs on test results and vehicle-specific service information. A wiring repair, connector service, or actuator or sensor repair may be appropriate only if diagnosis supports it. Do not replace a component based on the code alone; clear the code and verify the repair using the prescribed procedure.

Can I drive with P267B?

The code alone does not establish whether the vehicle is safe to drive. If the engine runs poorly, loses power, or shows other serious warnings, stop in a safe place and arrange professional help. If it runs normally, arrange diagnosis promptly and follow the vehicle’s owner’s manual.

P267B frequently asked questions

Does P267B mean the rocker arm actuator has failed?

No. It identifies a range or performance concern in the specified position-sensor circuit. Testing is needed to determine whether the actuator, sensor, wiring, or another issue is responsible.

What does Bank 2 mean?

It identifies one engine bank, but the location depends on the engine design. Check vehicle-specific service information rather than assuming a side.

Can I clear P267B without repairs?

Clearing the code does not correct its cause. If the underlying condition remains, the code may return; diagnose the vehicle before treating the issue as resolved.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.