P267C Code: Meaning & Diagnostic Guide
B Rocker Arm Actuator Position Sensor Circuit Low Bank 2
What does P267C mean?
P267C quick answer
P267C is a generic powertrain code for a low signal in the Bank 2 “B” rocker arm actuator position sensor circuit. It identifies a circuit reading, not a confirmed failed part.
Is P267C generic or manufacturer-specific?
P267C has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P267C works in the vehicle
The sensor circuit reports the position of a rocker arm actuator, which is part of a variable valve-control system. “Low” means the signal is below the expected range. Bank 2 is the engine bank that does not contain cylinder 1; the location and meaning of “B” can vary by vehicle.
P267C symptoms
Possible symptoms include a check-engine light, reduced performance, rough running, or no noticeable change. The code alone does not confirm that any of these symptoms are present.
Possible causes of P267C
Possible causes include a wiring or connector problem, a sensor or actuator issue, or a control-system fault. The vehicle’s service information and test results are needed to narrow down the cause.
How to diagnose P267C
- Check the vehicle-specific service information for how P267C and the “B” actuator circuit are defined.
- Use a scan tool to read stored codes and available freeze-frame data; note any related codes.
- With the vehicle safely powered down as directed by its service information, inspect relevant connectors and wiring for visible damage, corrosion, or loose connections.
- Have a qualified technician test the circuit and components using the manufacturer’s diagnostic procedure before replacing parts.
How to fix P267C
Repair should follow the confirmed diagnosis. Depending on test results, this may involve addressing wiring or connector damage, or servicing a sensor, actuator, or control-system component. Do not replace a part based on the code alone.
Can I drive with P267C?
Driving impact can vary. If the vehicle runs poorly, loses power, or displays additional warnings, avoid unnecessary driving and arrange professional inspection. If it appears to run normally, consult the owner’s manual and schedule diagnosis; the code alone cannot establish that continued driving is safe.
P267C frequently asked questions
What does P267C mean?
It indicates a low signal in the Bank 2 “B” rocker arm actuator position sensor circuit.
Does P267C prove the sensor has failed?
No. The code reports a circuit condition, and diagnosis is needed to identify its cause.
What does “Bank 2” mean?
It is the engine bank that does not contain cylinder 1. Its physical location depends on the engine.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.