Source-backed diagnostic reference

P267D Code: Meaning & Diagnostic Guide

B Rocker Arm Actuator Position Sensor Circuit High Bank 2

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P267D mean?

  • GENERIC: B Rocker Arm Actuator Position Sensor Circuit High Bank 2 Source
  • GENERIC: B Rocker Arm Actuator Position Sensor Circuit High Bank 2 Source

P267D quick answer

P267D is a generic powertrain code for a high signal in the Bank 2 “B” rocker arm actuator position sensor circuit. It identifies a circuit reading, not a confirmed failed part.

Is P267D generic or manufacturer-specific?

P267D has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P267D works in the vehicle

The code description points to the position-sensor circuit for the “B” rocker arm actuator on Bank 2. “Circuit high” means the reported electrical signal is higher than expected; it does not, by itself, identify why. Bank 2 refers to the engine bank defined by the vehicle manufacturer.

P267D symptoms

Possible symptoms vary by vehicle and may include a warning light, changes in engine performance, or no noticeable symptoms. The evidence provided does not establish that any particular symptom will occur.

Possible causes of P267D

Possible explanations include an electrical connection or wiring issue, a signal or power supply problem, or a fault involving the actuator or position-sensing system. The code alone does not confirm a failed component.

How to diagnose P267D

  1. Confirm the code with a suitable scan tool and note any other stored codes and available freeze-frame data.
  2. Consult service information for the specific vehicle to identify the Bank 2 “B” actuator circuit and its expected tests.
  3. With the vehicle safely switched off, visually check accessible wiring and connectors for damage, looseness, corrosion, or contamination.
  4. Have a qualified technician compare sensor readings and circuit measurements with the vehicle-specific specifications before replacing parts.

How to fix P267D

Repair should follow the results of vehicle-specific testing. Address any verified wiring or connector issue, and replace or service a component only if testing confirms it is faulty. Clear the code and verify the repair using the appropriate procedure.

Can I drive with P267D?

The code description alone cannot determine whether the vehicle is safe to drive. If the engine runs poorly, warning lights appear, or performance changes, limit driving and seek qualified diagnosis; otherwise, arrange an inspection promptly and follow the vehicle’s owner guidance.

P267D frequently asked questions

What does P267D mean?

It indicates a high signal in the Bank 2 “B” rocker arm actuator position sensor circuit.

Does P267D prove the position sensor has failed?

No. It reports a circuit condition and does not confirm which component, if any, has failed.

What does “circuit high” mean?

It means the circuit signal is above the expected range; vehicle-specific testing is needed to find the reason.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.