P2746 Code: Meaning & Diagnostic Guide
Intermediate Shaft Speed Sensor B Circuit Range/Performance
What does P2746 mean?
P2746 quick answer
P2746 is a generic powertrain code for an intermediate shaft speed sensor B circuit range/performance issue. It indicates that the signal is outside an expected range or does not behave as expected; it does not confirm which part has failed.
Is P2746 generic or manufacturer-specific?
P2746 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P2746 works in the vehicle
The transmission control system uses speed-sensor signals to monitor shaft rotation. “Circuit range/performance” describes an unexpected signal, which may relate to the sensor, its wiring, or another condition affecting the reading. The code alone does not identify the cause.
P2746 symptoms
There may be no noticeable symptoms. Depending on the vehicle and the underlying issue, possible symptoms could include warning lights, shifting changes, or reduced performance. These symptoms are not established by the code alone.
Possible causes of P2746
Possible causes can include a sensor signal problem, damaged or poorly connected wiring, or another issue affecting the signal. Further testing is needed before identifying a cause or replacing a part.
How to diagnose P2746
- Confirm P2746 with a suitable scan tool and note any other stored codes and available freeze-frame data.
- Consult vehicle-specific service information for the sensor location, circuit details, and test procedure.
- Check the relevant connector and accessible wiring for damage, corrosion, or a loose connection.
- Use the specified diagnostic procedure to assess the sensor circuit and signal; do not assume the sensor itself has failed.
- After any verified repair, clear the code if appropriate and check whether it returns under the conditions described by the service information.
How to fix P2746
The correct repair depends on test results and vehicle-specific information. Address only the fault confirmed by diagnosis; the code by itself is not a reason to replace the sensor or transmission.
Can I drive with P2746?
P2746 alone does not establish whether the vehicle is safe to drive. If shifting or vehicle behavior changes, a warning appears, or performance is reduced, avoid unnecessary driving and arrange professional assessment. Follow the vehicle owner’s manual for warning guidance.
P2746 frequently asked questions
What does P2746 mean?
It indicates an intermediate shaft speed sensor B circuit range/performance issue: the signal is outside an expected range or is not behaving as expected.
Does P2746 prove the sensor is faulty?
No. The code identifies a signal issue, not a confirmed failed component. Wiring, connections, or other signal-affecting conditions may need to be checked.
Can I keep driving with P2746?
The code alone cannot determine that. Consider the vehicle’s behavior and warning indicators, consult the owner’s manual, and seek professional assessment if shifting or performance changes.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.