P2748 Code: Meaning & Diagnostic Guide
Intermediate Shaft Speed Sensor B Circuit Intermittent
What does P2748 mean?
P2748 quick answer
P2748 is a generic powertrain code meaning the Intermediate Shaft Speed Sensor B circuit signal is intermittent. It identifies an inconsistent signal, not a confirmed failed sensor.
Is P2748 generic or manufacturer-specific?
P2748 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P2748 works in the vehicle
The transmission control system uses speed-sensor signals to monitor rotating parts. “Intermittent” means the signal may come and go or become inconsistent. The code alone does not identify the cause or confirm which part needs replacement.
P2748 symptoms
Depending on the vehicle and the underlying issue, possible symptoms may include a warning light, shifting changes, or no noticeable symptoms. The supplied code information does not establish that any particular symptom is present.
Possible causes of P2748
Possible explanations include an intermittent electrical connection, wiring or connector damage, a sensor signal problem, or another issue affecting the circuit. These are possibilities to investigate, not confirmed causes.
How to diagnose P2748
- Confirm the code with a scan tool and check for other stored codes and available freeze-frame information.
- Consult service information for the specific vehicle to identify the circuit and its test procedure.
- Inspect accessible wiring and connectors for looseness, corrosion, or visible damage.
- Use the vehicle-specific diagnostic procedure to check the circuit and sensor signal before deciding whether a component needs replacement.
How to fix P2748
Choose repairs based on test results. A wiring or connector issue may require attention, while a sensor or another circuit-related fault should be considered only if diagnosis supports it. Clear the code and verify the repair using the appropriate service procedure.
Can I drive with P2748?
The code alone cannot determine whether driving is safe. If the vehicle shifts abnormally, loses drive, or shows other concerning behavior, stop when safe and seek qualified assistance. Otherwise, consult the vehicle’s service guidance and arrange diagnosis.
P2748 frequently asked questions
What does P2748 mean?
It means the Intermediate Shaft Speed Sensor B circuit signal is intermittent; it does not by itself confirm a failed sensor.
Does P2748 mean the sensor must be replaced?
No. The circuit and related connections should be diagnosed before replacing parts.
Can I keep driving with P2748?
The code alone is not enough to judge. Consider the vehicle’s behavior and service guidance; seek help if shifting or vehicle operation is abnormal.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.