Source-backed diagnostic reference

P276C Code: Meaning & Diagnostic Guide

Electric/Auxiliary Transmission Fluid Pump B Motor Supply Voltage Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P276C mean?

  • GENERIC: Electric/Auxiliary Transmission Fluid Pump B Motor Supply Voltage Circuit High Source
  • GENERIC: Electric/Auxiliary Transmission Fluid Pump B Motor Supply Voltage Circuit High Source

P276C quick answer

P276C is a generic diagnostic trouble code indicating that the electric or auxiliary transmission fluid pump B motor supply-voltage circuit is reading higher than expected. It identifies a circuit condition, not a confirmed failed part.

Is P276C generic or manufacturer-specific?

P276C has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P276C works in the vehicle

The powertrain control system has detected voltage that is too high in the supply circuit for auxiliary transmission fluid pump motor B. The code alone does not identify the cause or establish which component has failed.

P276C symptoms

Depending on the vehicle and the effect of the fault, possible signs may include a warning light, a transmission-related message, or changes in transmission operation. Some vehicles may show no obvious symptoms.

Possible causes of P276C

Possible causes include a wiring or connector problem, an issue with the pump motor or its control circuit, or a fault in a related control module. These are possibilities, not confirmed diagnoses.

How to diagnose P276C

  1. Confirm P276C with a suitable diagnostic scanner and check for other stored codes.
  2. Record relevant freeze-frame information, which shows operating conditions when the code was set.
  3. Use vehicle-specific service information to identify the correct pump circuit and expected test values.
  4. Have a qualified technician inspect accessible wiring and connectors for damage, corrosion, or poor connections.
  5. Test the circuit and related components using the manufacturer’s diagnostic procedure; do not assume the pump itself is faulty.

How to fix P276C

Repair should follow the test results and vehicle-specific service information. A wiring, connector, pump, or control-circuit repair may be appropriate depending on what is confirmed. Avoid replacing parts based on the code alone. If the system involves high voltage, leave diagnosis and repair to a qualified technician.

Can I drive with P276C?

The code alone cannot determine whether the vehicle is safe to drive. If transmission operation changes, a warning appears, or the vehicle behaves abnormally, stop when safe and arrange professional assessment. Otherwise, consult the owner’s manual or a qualified technician promptly.

P276C frequently asked questions

What does P276C mean?

It indicates that the supply-voltage circuit for electric or auxiliary transmission fluid pump motor B has been detected as higher than expected.

Does P276C confirm that the pump has failed?

No. The code reports a circuit condition and does not by itself identify a failed component.

Can I diagnose or repair this circuit myself?

Basic code confirmation may be possible with an appropriate scanner, but circuit testing should follow vehicle-specific service information. Do not work on high-voltage components; use a qualified technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.