Source-backed diagnostic reference

P276E Code: Meaning & Diagnostic Guide

Electric/Auxiliary Transmission Fluid Pump B Motor Current Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P276E mean?

  • GENERIC: Electric/Auxiliary Transmission Fluid Pump B Motor Current Low Source
  • GENERIC: Electric/Auxiliary Transmission Fluid Pump B Motor Current Low Source

P276E quick answer

P276E is a generic powertrain code for “Electric/Auxiliary Transmission Fluid Pump B Motor Current Low.” It means the system detected lower-than-expected current in the pump B motor circuit; it does not by itself confirm that the pump has failed.

Is P276E generic or manufacturer-specific?

P276E has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P276E works in the vehicle

The code refers to an electrical-current reading associated with an electric or auxiliary transmission-fluid pump. The letter B identifies the circuit or pump designation used by the vehicle’s system; its exact meaning can vary by vehicle.

P276E symptoms

Possible symptoms include a warning light, a transmission-related message, or changes in transmission operation. A vehicle may also have no obvious symptoms. The evidence provided does not establish which symptoms apply.

Possible causes of P276E

Possible explanations include a poor electrical connection, damaged wiring, a power or ground issue, a problem with the pump motor, or a control-system issue. The code alone does not identify the cause.

How to diagnose P276E

  1. Record the code and any other stored codes, along with available freeze-frame information.
  2. Check the vehicle’s service information for the code’s specific meaning and diagnostic procedure.
  3. Have a qualified technician inspect the relevant pump circuit, connectors, and wiring for visible damage or poor connections.
  4. Use the vehicle-specific procedure to test the circuit and pump before deciding what needs repair.
  5. After any repair, clear the code and verify whether it returns under appropriate test conditions.

How to fix P276E

Repair should be based on test results. Depending on the vehicle and diagnosis, this may involve correcting a connection or wiring issue, or addressing a confirmed pump or control-circuit fault. Do not replace parts based on the code alone. Avoid work on potentially high-voltage systems unless qualified and equipped to do so.

Can I drive with P276E?

The code alone cannot determine whether the vehicle is safe to drive. If transmission operation changes, a warning appears, or the vehicle behaves abnormally, stop when safe and arrange professional assessment. Otherwise, consult the vehicle’s manual or a qualified technician promptly.

P276E frequently asked questions

Does P276E mean the transmission pump has failed?

No. It reports low current in the electric or auxiliary transmission-fluid pump B motor circuit. Testing is needed to find the cause.

Can P276E have more than one cause?

Yes. Wiring, connections, power supply, the pump motor, or its control circuit may need to be checked.

Is P276E specific to one vehicle manufacturer?

The supplied definition is generic. The exact circuit designation and diagnostic procedure can vary by vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.