Source-backed diagnostic reference

P276F Code: Meaning & Diagnostic Guide

Electric/Auxiliary Transmission Fluid Pump B Motor Current High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P276F mean?

  • GENERIC: Electric/Auxiliary Transmission Fluid Pump B Motor Current High Source
  • GENERIC: Electric/Auxiliary Transmission Fluid Pump B Motor Current High Source

P276F quick answer

P276F is a generic transmission diagnostic trouble code meaning “Electric/Auxiliary Transmission Fluid Pump B Motor Current High.” It indicates that the system detected higher-than-expected current for the pump motor; it does not, by itself, confirm which part has failed.

Is P276F generic or manufacturer-specific?

P276F has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P276F works in the vehicle

“Current high” means the monitored electrical draw exceeded a threshold. “Pump B” identifies a pump circuit or component designation, but its exact meaning and diagnostic limits can vary by vehicle. Check vehicle-specific service information before drawing conclusions.

P276F symptoms

Some vehicles may show a warning light, altered shifting, or reduced-performance mode, while others may have few noticeable symptoms. The code alone does not establish what symptoms will occur.

Possible causes of P276F

Possibilities to investigate include a pump motor drawing excessive current, a wiring or connector problem, or an issue affecting pump load or control. P276F alone does not confirm any of these causes or identify a failed component.

How to diagnose P276F

  1. Confirm P276F with a scan tool and note any other stored codes and available freeze-frame data.
  2. Use service information for the specific vehicle to verify the code definition, test conditions, and the meaning of “Pump B.”
  3. Have a qualified technician inspect relevant wiring and connectors for visible damage, corrosion, or loose connections.
  4. Follow the vehicle maker’s diagnostic procedure to assess the pump circuit and related components; avoid guessing or replacing parts based on the code alone.

How to fix P276F

Repair depends on the vehicle-specific test results. A technician should identify the cause before recommending wiring, pump, or control-system repairs. Do not attempt high-voltage testing or repairs unless qualified and equipped for that vehicle.

Can I drive with P276F?

The code alone cannot determine whether continued driving is safe. If the vehicle shifts abnormally, displays a transmission warning, or loses power, stop when safe and seek qualified assistance. Otherwise, consult the owner’s manual or a technician promptly.

P276F frequently asked questions

What does P276F mean?

It generally means the electric or auxiliary transmission fluid pump B motor current was detected as high.

Does P276F prove the pump has failed?

No. It reports a high-current condition, not a confirmed failed part. Vehicle-specific testing is needed.

Can I drive with P276F?

The code alone does not establish whether driving is safe. Consider the vehicle’s symptoms and warnings, and consult the owner’s manual or a qualified technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.