Source-backed diagnostic reference

P2798 Code: Meaning & Diagnostic Guide

Electric/Auxiliary Transmission Fluid Pump A Control Circuit Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2798 mean?

  • GENERIC: Electric/Auxiliary Transmission Fluid Pump A Control Circuit Low Source
  • GENERIC: Electric/Auxiliary Transmission Fluid Pump A Control Circuit Low Source

P2798 quick answer

P2798 is a generic diagnostic trouble code for “Electric/Auxiliary Transmission Fluid Pump A Control Circuit Low.” It indicates that the control circuit signal is below the expected level; it does not by itself confirm that the pump has failed.

Is P2798 generic or manufacturer-specific?

P2798 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2798 works in the vehicle

The code points to an electrical control-circuit condition associated with electric or auxiliary transmission fluid pump A. “Circuit low” describes a signal reading, not a confirmed faulty part. The exact circuit layout and diagnostic procedure depend on the vehicle.

P2798 symptoms

Depending on the vehicle and operating conditions, there may be a warning light, stored transmission-related codes, or changes in transmission operation. Some vehicles may show no obvious symptoms.

Possible causes of P2798

Possible causes include damaged wiring, a loose or corroded connector, a circuit power or ground problem, or a fault involving the pump or its control system. The code alone does not identify which, if any, component has failed.

How to diagnose P2798

  1. Record P2798 and any other stored codes and freeze-frame data before clearing codes.
  2. Check the vehicle-specific service information to identify the circuit and the appropriate diagnostic procedure.
  3. With the vehicle safely powered down as specified by its service information, inspect accessible related wiring and connectors for damage, looseness, or corrosion.
  4. Have a qualified technician test the circuit and pump controls using vehicle-specific procedures and appropriate equipment.
  5. Recheck for codes after any verified repair.

How to fix P2798

Address the fault found during diagnosis rather than replacing the pump based on P2798 alone. Because electric or auxiliary transmission pump systems may be associated with high-voltage vehicles, do not probe or repair high-voltage components; use a qualified technician and the correct service information.

Can I drive with P2798?

Driving advice depends on the vehicle and its symptoms. If transmission operation changes, a warning appears, or the vehicle behaves unpredictably, stop when safe and seek professional assessment. If there are no symptoms, consult the vehicle manual or a qualified technician about whether continued driving is appropriate.

P2798 frequently asked questions

Does P2798 mean the transmission pump has failed?

No. It identifies a low control-circuit signal associated with pump A, but diagnosis is needed to determine the cause.

Can wiring cause P2798?

Yes. Damaged wiring or a poor connector connection is one possible explanation, among others.

Can I diagnose P2798 without vehicle-specific information?

A scan tool can retrieve the code, but the circuit layout and test procedure vary by vehicle. Use the applicable service information or consult a qualified technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.