P288A Code: Meaning & Diagnostic Guide
Park Lock/Pawl Actuator Circuit High
What does P288A mean?
P288A quick answer
P288A is listed as “Park Lock/Pawl Actuator Circuit High.” It indicates that the monitored actuator circuit is reporting a higher-than-expected electrical signal; the code alone does not confirm which part has failed.
Is P288A generic or manufacturer-specific?
P288A has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P288A works in the vehicle
A park pawl is a mechanism that helps hold a vehicle stationary when Park is selected. The actuator circuit carries electrical signals to or from the mechanism. “Circuit high” describes a signal reading above the expected range, not necessarily a failed actuator. The code listing provided is generic and does not establish applicability to a particular make or model.
P288A symptoms
Depending on the vehicle and the underlying issue, possible signs may include a warning light or message, difficulty selecting Park, or the vehicle not holding as expected. Some vehicles may show no noticeable symptoms.
Possible causes of P288A
Possible causes include a wiring or connector problem, a power or ground issue, an actuator fault, or a control-system issue. These are possibilities only; further diagnosis is needed to identify the cause.
How to diagnose P288A
- Check the vehicle-specific service information to confirm that P288A applies to that make, model, year, and powertrain.
- Record any related codes and available freeze-frame data before clearing codes.
- Have a qualified technician inspect the relevant wiring and connectors for visible damage, corrosion, or loose connections.
- Use the manufacturer’s diagnostic procedure and suitable scan equipment to check circuit readings and actuator operation.
- If the vehicle is electrified or the diagnosis involves high-voltage components, use a technician qualified for that system; do not access or repair high-voltage parts yourself.
How to fix P288A
Repair depends on the test results and vehicle-specific procedures. A technician may need to address wiring, connections, power or ground, the actuator, or a control-system issue. Do not replace parts based on the code alone.
Can I drive with P288A?
The code alone does not establish whether the vehicle is safe to drive. If Park does not engage or the vehicle will not stay securely stationary, do not rely on it to hold the vehicle; arrange professional assistance. Follow any vehicle warnings and consult a qualified technician.
P288A frequently asked questions
What does P288A mean?
The supplied generic listing defines P288A as “Park Lock/Pawl Actuator Circuit High,” meaning the monitored circuit signal is higher than expected.
Does P288A prove the park lock actuator has failed?
No. The code identifies a circuit condition, not a confirmed failed component. Wiring, connections, power or ground, and control-system issues may also need to be checked.
Is P288A the same for every vehicle?
The evidence provided gives a generic description, but it does not confirm that the code applies in the same way to every make or model. Check vehicle-specific service information.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.