Source-backed diagnostic reference

P289B Code: Meaning & Diagnostic Guide

Cylinder 3 Ion Current Sense Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P289B mean?

  • GENERIC: Cylinder 3 Ion Current Sense Circuit High Source
  • GENERIC: Cylinder 3 Ion Current Sense Circuit High Source

P289B quick answer

P289B is a generic diagnostic trouble code meaning “Cylinder 3 Ion Current Sense Circuit High.” It indicates that the engine control system detected a high signal in the ion-current sensing circuit associated with cylinder 3; it does not by itself identify the cause.

Is P289B generic or manufacturer-specific?

P289B has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P289B works in the vehicle

Ion-current sensing uses an electrical signal related to combustion in a cylinder. “Circuit high” means the detected signal is above the range expected by the control system. The code alone does not confirm a failed part or establish why the signal is high.

P289B symptoms

Possible symptoms can vary by vehicle and fault conditions. The supplied reference does not specify symptoms, so issues such as rough running or a warning light should be treated as possibilities, not as effects guaranteed by P289B.

Possible causes of P289B

The code definition does not identify a cause. A circuit, connection, sensor-related issue, or another engine-control condition may need investigation; none is confirmed by the code alone.

How to diagnose P289B

  1. Confirm P289B with a compatible scan tool and note any other stored codes and available freeze-frame data.
  2. Check vehicle-specific service information for the correct diagnostic procedure and circuit description.
  3. Have a qualified technician inspect relevant connectors and wiring for visible damage or poor connections.
  4. Use the manufacturer’s diagnostic procedure to test the circuit and related systems before replacing parts.

How to fix P289B

Repair decisions should follow test results and vehicle-specific service information. Do not replace a component based on P289B alone. Avoid high-voltage system work unless qualified and equipped to perform it safely.

Can I drive with P289B?

Driving impact cannot be determined from this code alone. If the vehicle runs poorly, loses power, or displays additional warnings, arrange a prompt professional assessment and stop somewhere safe if continuing to drive seems unsafe.

P289B frequently asked questions

What does P289B mean?

P289B generically means “Cylinder 3 Ion Current Sense Circuit High.” It reports a high signal in the cylinder 3 ion-current sensing circuit.

Does P289B identify a failed part?

No. The code identifies a circuit condition, not a confirmed failed component or cause.

Can I keep driving with P289B?

The code alone does not establish whether driving is safe or how severe the issue is. Consider the vehicle’s behavior and warning messages, and seek professional diagnosis.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.