Source-backed diagnostic reference

P289F Code: Meaning & Diagnostic Guide

Cylinder 4 Ion Current Sense Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P289F mean?

  • GENERIC: Cylinder 4 Ion Current Sense Circuit High Source
  • GENERIC: Cylinder 4 Ion Current Sense Circuit High Source

P289F quick answer

P289F is a generic powertrain code defined as “Cylinder 4 Ion Current Sense Circuit High.” It means the engine computer detected a signal that is higher than expected in the ion-current sensing circuit associated with cylinder 4; it does not, by itself, identify a failed part.

Is P289F generic or manufacturer-specific?

P289F has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P289F works in the vehicle

Ion-current sensing uses an electrical signal associated with combustion to help monitor a cylinder. “Circuit high” describes the signal detected by the control system, not a confirmed cause. The circuit design and diagnostic details can vary by vehicle.

P289F symptoms

Possible symptoms may include a warning light, rough running, reduced performance, or no noticeable change. The supplied code definition does not establish which symptoms, if any, will occur.

Possible causes of P289F

Possible explanations include a wiring or connector problem, an electrical-signal issue, or a fault in a component or control system involved in ion-current sensing. These are diagnostic possibilities, not confirmed causes.

How to diagnose P289F

  1. Check for other stored codes and note when the warning or symptoms occur.
  2. Use service information for the specific vehicle to confirm how its cylinder 4 ion-current circuit is designed and tested.
  3. With the vehicle safely switched off, look for visible damage, loose connections, or corrosion in accessible related wiring and connectors.
  4. Have a qualified technician test the circuit using the vehicle maker’s diagnostic procedure before replacing parts.

How to fix P289F

The correct repair depends on test results. Address any verified wiring or connection issue, then retest the system. Do not replace a sensor, control module, or other part based on P289F alone.

Can I drive with P289F?

The code alone cannot establish whether the vehicle is safe to drive. If it runs poorly, loses power, or shows other serious symptoms, stop driving when safe and seek professional assessment. If there are no symptoms, arrange diagnosis promptly and follow the vehicle’s warning messages and owner’s manual.

P289F frequently asked questions

What does P289F mean?

It is defined as “Cylinder 4 Ion Current Sense Circuit High,” indicating an unexpectedly high signal detected in that circuit.

Does P289F prove that a particular part has failed?

No. The code identifies a circuit condition, not a confirmed failed component. Diagnosis is needed to find the cause.

Can P289F cause rough running?

Rough running is possible, but symptoms vary and are not established by the code definition alone.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.