P2E60 Code: Meaning & Diagnostic Guide
Cylinder 8 Alternative Fuel Misfire Detected
What does P2E60 mean?
P2E60 quick answer
P2E60 is a generic diagnostic trouble code meaning “Cylinder 8 Alternative Fuel Misfire Detected.” It indicates that the engine computer detected a misfire associated with cylinder 8 while operating in an alternative-fuel mode; it does not identify the cause or a failed part.
Is P2E60 generic or manufacturer-specific?
P2E60 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P2E60 works in the vehicle
A misfire means a cylinder did not contribute power as expected during combustion. “Alternative fuel” describes the operating mode, but the code alone does not specify the fuel system, vehicle applicability, or reason for the misfire. Confirm the definition and diagnostic procedure using information for the specific vehicle.
P2E60 symptoms
Depending on the vehicle and fault, possible signs may include rough running, reduced power, hesitation, or an illuminated check-engine light. A stored code may also be present without obvious symptoms.
Possible causes of P2E60
The code does not confirm a component failure. Possible areas for a technician to investigate include ignition, fuel delivery, cylinder condition, wiring, or controls related to alternative-fuel operation.
How to diagnose P2E60
- Confirm the code and its meaning using vehicle-specific service information.
- Check for other diagnostic codes and review available freeze-frame data, which records engine conditions when the fault was detected.
- Have a qualified technician assess cylinder 8 and the relevant ignition, fuel, wiring, and engine-control systems.
- Use vehicle-specific procedures for any alternative-fuel system checks; do not assume the code identifies the failed part.
How to fix P2E60
Repair should follow the confirmed diagnosis, not the code alone. A qualified technician can determine whether a repair is needed and verify the result after it is completed.
Can I drive with P2E60?
The code alone does not establish whether the vehicle is safe to drive. If it runs very roughly, loses significant power, or the check-engine light flashes, stop when safe and arrange professional assessment. Otherwise, consult vehicle-specific guidance and have the code checked promptly.
P2E60 frequently asked questions
What does P2E60 mean?
It means “Cylinder 8 Alternative Fuel Misfire Detected”: the engine computer detected a misfire associated with cylinder 8 during alternative-fuel operation.
Does P2E60 identify a failed part?
No. It reports a detected misfire but does not establish its cause or confirm that any particular component has failed.
Can the cause be determined from the code alone?
No. Diagnosis requires vehicle-specific information and checks of the systems that could contribute to the misfire.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.