Source-backed diagnostic reference

P2E94 Code: Meaning & Diagnostic Guide

Charge Port Door B Open Request Switch Circuit Performance

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2E94 mean?

  • GENERIC: Charge Port Door B Open Request Switch Circuit Performance Source
  • GENERIC: Charge Port Door B Open Request Switch Circuit Performance Source

P2E94 quick answer

P2E94 is a generic diagnostic trouble code for “Charge Port Door B Open Request Switch Circuit Performance.” It means the vehicle detected performance outside its expected range in the circuit associated with a request to open charge port door B. The code alone does not identify a failed part.

Is P2E94 generic or manufacturer-specific?

P2E94 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2E94 works in the vehicle

The open-request switch is the control that signals a request to open a charge port door. “Circuit performance” means the signal or circuit behavior did not match what the vehicle expected. The meaning of “B” and the diagnostic test details can vary by vehicle; check the vehicle-specific service information.

P2E94 symptoms

Depending on the vehicle and the issue, the charge port door may not open as expected, may respond intermittently, or there may be a warning message. These symptoms are possibilities, not confirmed effects of the code.

Possible causes of P2E94

Possible causes include an obstructed or damaged door mechanism, a switch or connector issue, wiring damage, or another problem in the control circuit. P2E94 by itself does not confirm any particular cause or failed component.

How to diagnose P2E94

  1. Record P2E94 and any other stored codes and note when the code appeared.
  2. Check the owner’s manual for the vehicle-specific meaning of charge port door B.
  3. With the vehicle powered down as directed by its manual, look for visible debris or damage around the charge port door and its accessible controls.
  4. Have a qualified technician use vehicle-specific service information and diagnostic equipment to assess the switch signal and related circuit.
  5. Avoid probing or repairing high-voltage components; follow the manufacturer’s service procedures.

How to fix P2E94

The correct repair depends on the cause found during diagnosis. An obstruction may need to be cleared, while a damaged switch, connector, wiring, or control component may require repair or replacement. Do not replace parts based on the code alone.

Can I drive with P2E94?

P2E94 alone does not establish whether the vehicle is safe to drive or charge. Follow any vehicle warnings and the owner’s manual. If the charge port door cannot be operated as intended or other warnings appear, contact a qualified service provider.

P2E94 frequently asked questions

What does P2E94 mean?

It is a generic code for charge port door B open-request switch circuit performance. The code indicates unexpected circuit behavior, not a confirmed failed part.

Does P2E94 mean the charge port switch is faulty?

No. A switch issue is one possibility, but the code may also relate to an obstruction, connector, wiring, or another part of the control circuit.

Can I diagnose P2E94 without vehicle-specific information?

You can record the code and check for visible obstruction or damage, but the meaning of “B” and the required circuit tests depend on the vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.