Source-backed diagnostic reference

U000188 Code: Meaning & Diagnostic Guide

The WEY VV7 PHEV repair reference lists U000188 as a CAN1 bus-off communication fault. It identifies possible causes including a poor CAN1 connection, wiring short/open faults, or an ECM-side CAN1 interface fault.

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U000188 mean?

  • Great Wall Motor (WEY): The WEY VV7 PHEV repair reference lists U000188 as a CAN1 bus-off communication fault. It identifies possible causes including a poor CAN1 connection, wiring short/open faults, or an ECM-side CAN1 interface fault. Source

U000188 quick answer

U000188 is listed in a WEY VV7 PHEV repair reference as a CAN1 bus-off communication fault. It indicates a communication problem on the CAN1 network; the code alone does not identify a failed part.

Is U000188 generic or manufacturer-specific?

U000188 currently has manufacturer-labelled reference definitions for Great Wall Motor (WEY). A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U000188 works in the vehicle

CAN is a vehicle network that lets electronic control modules exchange messages. “Bus-off” means a network interface has stopped communicating on that bus, often after detecting communication errors. The supplied reference associates U000188 with CAN1 on the WEY VV7 PHEV; applicability to other vehicles is not established here.

U000188 symptoms

Depending on the vehicle and which modules are affected, communication faults may coincide with warning lights, stored communication codes, or irregular operation of related systems. These are possibilities, not symptoms confirmed by the reference.

Possible causes of U000188

The reference lists a poor CAN1 connection, an open or short in the wiring, or an ECM-side CAN1 interface fault as possible causes. These require testing; the code does not confirm any one cause.

How to diagnose U000188

  1. Check the vehicle’s service information to confirm that U000188 applies to its make, model, year, and powertrain.
  2. Use a suitable scan tool to record all codes and identify which modules report communication problems before clearing anything.
  3. Have a qualified technician inspect relevant CAN1 connectors and wiring for looseness, damage, corrosion, opens, or shorts.
  4. Use vehicle-specific diagnostic procedures to test the CAN1 network and ECM-side interface; do not replace a component based on this code alone.

How to fix U000188

Repair any connection or wiring fault confirmed by testing. If those checks pass, further vehicle-specific diagnosis may be needed to assess the ECM-side CAN1 interface. Use a qualified automotive technician, especially on a hybrid vehicle, and avoid high-voltage system work without appropriate training and equipment.

Can I drive with U000188?

The supplied reference does not establish whether driving is safe. If the vehicle has warning lights, abnormal operation, or reduced performance, consult the owner’s manual and arrange professional assessment; stop in a safe place if it becomes difficult to control or operate normally.

U000188 frequently asked questions

What does U000188 mean?

In the supplied WEY VV7 PHEV reference, it means a CAN1 bus-off communication fault: the CAN1 network has stopped communicating normally.

Does U000188 prove the ECM has failed?

No. The reference lists an ECM-side CAN1 interface fault as one possibility, alongside connection and wiring problems.

Can U000188 be diagnosed from the code alone?

No. The code identifies a communication issue, but inspection and vehicle-specific network testing are needed to find the cause.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.