Source-backed diagnostic reference

U0006 Code: Meaning & Diagnostic Guide

High Speed CAN Communication Bus (-) Open

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U0006 mean?

  • GENERIC: High Speed CAN Communication Bus (-) Open Source
  • GENERIC: High Speed CAN Communication Bus (-) Open Source

U0006 quick answer

U0006 means “High Speed CAN Communication Bus (-) Open.” It indicates a detected open or interruption on the negative line of a high-speed Controller Area Network (CAN) communication bus; the code alone does not identify the failed part.

Is U0006 generic or manufacturer-specific?

U0006 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U0006 works in the vehicle

CAN is a network that lets vehicle control modules exchange information. “Open” means the electrical path may be interrupted, while “(-)” identifies the bus’s negative signal line. U0006 is a communication-network code, not a diagnosis of a specific component.

U0006 symptoms

Depending on the vehicle and which modules are affected, possible context may include warning lights, communication-related fault codes, or intermittent functions. These symptoms are not established by the code alone, and a vehicle may show no obvious symptoms.

Possible causes of U0006

Possible areas to investigate include wiring or connector damage, a poor connection, or a problem elsewhere on the communication network. U0006 by itself does not confirm any of these causes or identify a failed component.

How to diagnose U0006

  1. Record U0006 and any other stored codes, including which modules reported them and whether they are current or historical.
  2. Use vehicle-specific service information to identify the affected high-speed CAN network and its circuit layout.
  3. Check accessible wiring and connectors for visible damage, loose connections, corrosion, or signs of moisture; avoid probing circuits without the correct procedure and equipment.
  4. Have a qualified technician perform network and electrical tests as specified for the vehicle, then verify whether the code returns after repairs.

How to fix U0006

The appropriate repair depends on test results and vehicle-specific service information. A confirmed wiring or connection issue may call for repair of that circuit, but do not replace modules based on U0006 alone. Seek qualified service if diagnosis requires electrical testing or access to high-voltage areas.

Can I drive with U0006?

The code alone cannot establish whether the vehicle is safe to drive. Consider warning lights, loss of vehicle functions, and the vehicle’s behavior; if an important function is impaired or operation seems unsafe, stop in a safe place and arrange professional assistance.

U0006 frequently asked questions

What does U0006 mean?

It means “High Speed CAN Communication Bus (-) Open,” indicating a detected interruption or open condition on the network’s negative signal line.

Does U0006 identify a failed part?

No. It identifies a communication-circuit condition, not a confirmed failed wire, connector, module, or other component.

Can I diagnose U0006 by replacing a control module?

Not from the code alone. Network testing and vehicle-specific diagnostic information are needed before deciding what, if anything, to replace.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.