U0023 Code: Meaning & Diagnostic Guide
Low Speed CAN Communication Bus (+) High
What does U0023 mean?
U0023 quick answer
U0023 is a network-related diagnostic trouble code. Generic references describe it as “Low Speed CAN Communication Bus (+) High”; another describes the positive bus line as shorted to the negative line. The exact interpretation depends on the vehicle and diagnostic system.
Is U0023 generic or manufacturer-specific?
U0023 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How U0023 works in the vehicle
CAN is a communication network that lets vehicle control modules exchange information. “Bus (+)” refers to one of its communication lines. The code indicates an abnormal condition reported on the low-speed network, but the code alone does not identify a failed part or confirm the precise electrical fault.
U0023 symptoms
Depending on the vehicle and which modules are affected, there may be warning lights, communication-related messages, or features that work intermittently or do not work. Some vehicles may show no obvious symptoms. These are possibilities, not symptoms established by the code itself.
Possible causes of U0023
Possible causes include wiring or connector damage, a short or other electrical fault on the network, a module or connection affecting communication, or a low-voltage or intermittent condition. U0023 alone does not confirm any of these causes.
How to diagnose U0023
- Record all stored and pending codes, the modules reporting them, and any available freeze-frame data before clearing codes.
- Use vehicle-specific service information to confirm how U0023 is defined for the vehicle and which modules use the low-speed network.
- Check battery and charging-system condition, and visually inspect relevant accessible wiring and connectors for damage, corrosion, looseness, or moisture.
- Have a qualified technician test network wiring and communication using the correct service procedures and equipment; avoid replacing parts based on this code alone.
How to fix U0023
The repair depends on test results. A technician may need to address a wiring or connector issue, resolve a power or ground concern, or investigate a module only if testing supports that conclusion. Do not attempt high-voltage system repairs; seek a qualified professional when diagnosis involves high-voltage components.
Can I drive with U0023?
U0023 does not by itself establish whether a vehicle is safe to drive. If important systems are malfunctioning, warning messages appear, or drivability is affected, stop when safe and arrange professional assessment. If there are no noticeable issues, consult the vehicle’s manual or a qualified technician promptly for vehicle-specific advice.
U0023 frequently asked questions
Does U0023 identify a specific failed part?
No. It indicates a reported low-speed CAN communication fault, but further vehicle-specific diagnosis is needed to identify the cause.
Why do generic references describe U0023 differently?
The supplied generic references use different wording: one says the positive bus line is high, while another describes it as shorted to the negative line. Confirm the definition and diagnostic procedure for the specific vehicle.
Can I clear U0023 and assume the problem is fixed?
No. Clearing the code does not repair an underlying fault. Record the diagnostic information first, then check whether the code returns after appropriate testing.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.