Source-backed diagnostic reference

U0074 Code: Meaning & Diagnostic Guide

Control Module Communication Bus B Off

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U0074 mean?

  • GENERIC: Control Module Communication Bus B Off Source
  • GENERIC: Control Module Communication Bus "B" Off Source

U0074 quick answer

U0074 is a generic diagnostic trouble code meaning “Control Module Communication Bus B Off.” It indicates a problem with communication on network Bus B, but the code alone does not identify the cause or a failed component.

Is U0074 generic or manufacturer-specific?

U0074 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U0074 works in the vehicle

A vehicle’s control modules exchange information over communication networks called buses. “Bus B Off” means communication on the network designated Bus B is reported as unavailable or off. The code does not specify which module, wiring, or other condition is responsible.

U0074 symptoms

Depending on the vehicle and which functions use Bus B, possible signs may include warning lights, communication-related messages, or features that work intermittently or stop working. Some vehicles may show no obvious symptoms.

Possible causes of U0074

Possible causes can include a temporary communication interruption, a power or ground issue, wiring or connector problems, or a fault involving a module on the network. These are possibilities, not confirmed causes for this code.

How to diagnose U0074

  1. Record all stored and pending codes, including which modules reported them and any available freeze-frame information.
  2. Check the vehicle-specific service information for the meaning and layout of Bus B; network design varies by vehicle.
  3. Have a qualified technician assess relevant module power and ground supplies, connectors, and wiring using the correct service procedures.
  4. Use vehicle-appropriate diagnostic equipment to determine which modules can communicate and whether the fault is current or intermittent.
  5. Recheck codes and affected functions after any identified issue is addressed.

How to fix U0074

The correct repair depends on diagnosis. Do not replace a module based on U0074 alone. A qualified technician should identify the communication interruption and follow vehicle-specific service information. Avoid attempting high-voltage system repairs.

Can I drive with U0074?

U0074 alone does not establish whether a vehicle is safe to drive. If warning lights, loss of important functions, or drivability problems occur, stop when safe and seek professional advice. Otherwise, arrange diagnosis promptly and follow the vehicle’s warnings and manual.

U0074 frequently asked questions

What does U0074 mean?

It means “Control Module Communication Bus B Off”: communication on the network called Bus B is reported as unavailable or off.

Does U0074 identify a specific failed part?

No. The code identifies a communication-network problem but does not confirm which component or condition caused it.

Can I drive with U0074?

The code alone cannot determine whether driving is safe. Consider any warning lights or affected functions, consult the vehicle manual, and seek professional guidance.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.