Source-backed diagnostic reference

U007C Code: Meaning & Diagnostic Guide

Control Module Communication Bus J Off

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U007C mean?

  • GENERIC: Control Module Communication Bus J Off Source
  • GENERIC: Control Module Communication Bus J Off Source

U007C quick answer

U007C means “Control Module Communication Bus J Off.” It indicates a detected communication problem involving network bus J, but the code alone does not identify the cause or a failed component.

Is U007C generic or manufacturer-specific?

U007C has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U007C works in the vehicle

A vehicle network bus is a communication pathway that lets electronic control modules exchange information. “Off” indicates that communication on bus J was detected as unavailable or interrupted. The exact meaning and diagnostic procedure can depend on the vehicle.

U007C symptoms

Depending on the vehicle and which modules are affected, possible signs may include warning lights, messages, or features that do not work as expected. Some vehicles may show no obvious symptoms.

Possible causes of U007C

The code does not confirm a specific cause. Possible areas to investigate include network wiring or connectors, module power or ground, or a communication-module issue. Vehicle-specific information is needed to narrow this down.

How to diagnose U007C

  1. Record the code and any other stored codes or warning messages before clearing anything.
  2. Check the vehicle service information for the exact definition and test procedure for U007C.
  3. Have a qualified technician inspect relevant network wiring and connectors, and verify module power and ground using the vehicle-specific procedure.
  4. Use suitable diagnostic equipment to check which modules communicate and follow the results before replacing parts.

How to fix U007C

The appropriate repair depends on the diagnostic findings. Do not replace a module based on U007C alone; confirm the fault using vehicle-specific service information and testing.

Can I drive with U007C?

The code alone cannot establish whether the vehicle is safe to drive. Consult the owner’s manual and seek professional advice, especially if warning messages, loss of vehicle functions, or drivability problems occur.

U007C frequently asked questions

What does U007C mean?

It means “Control Module Communication Bus J Off,” indicating a detected communication issue involving bus J.

Does U007C identify the faulty part?

No. It describes a communication condition, not a confirmed failed component.

Can U007C be diagnosed the same way on every vehicle?

No. The precise interpretation and diagnostic steps may vary by vehicle, so use the applicable service information.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.