U0091 Code: Meaning & Diagnostic Guide
Vehicle Communication Bus G (-) shorted to Bus G (+)
What does U0091 mean?
U0091 quick answer
U0091 is a vehicle network communication code, but the supplied generic references give different definitions: one describes a short between Bus G (-) and Bus G (+), while another describes CAN Communication Bus C being off. Check service information for the specific vehicle before interpreting the code.
Is U0091 generic or manufacturer-specific?
U0091 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How U0091 works in the vehicle
U codes relate to communication between vehicle control modules. A bus is a shared network that lets modules exchange information. Because the references disagree on which bus or fault U0091 identifies, the code alone does not confirm a particular failed component.
U0091 symptoms
Depending on the vehicle and the underlying network issue, possible context may include warning lights, communication-related messages, or other stored network codes. The supplied evidence does not establish any specific symptoms.
Possible causes of U0091
Possible areas to investigate include network wiring, connectors, power or ground to a module, or a module that is not communicating. These are general possibilities, not confirmed causes of U0091.
How to diagnose U0091
- Record the vehicle’s make, model, year, and engine, then look up U0091 in manufacturer-specific service information.
- Scan all available modules and save the codes and freeze-frame data before clearing anything.
- Check whether other communication codes are present and note which modules are reporting them.
- Following vehicle-specific procedures, visually inspect relevant network wiring and connectors for damage, looseness, or corrosion.
- Have a qualified technician perform network testing and confirm any suspected fault before replacing parts.
How to fix U0091
There is no single repair established by the supplied evidence. The correct fix depends on the vehicle-specific definition and test results; avoid replacing modules or wiring based on the code alone. Use a qualified technician for electrical diagnosis, and do not attempt high-voltage system repairs.
Can I drive with U0091?
The code description alone cannot determine whether the vehicle is safe to drive. If there are warning messages, reduced function, stalling, or other concerning behavior, stop when safe and seek professional assessment. Otherwise, consult the vehicle manual or a technician for advice specific to the vehicle.
U0091 frequently asked questions
What does code U0091 mean?
The supplied generic references disagree: one describes a short between Bus G (-) and Bus G (+), and the other describes CAN Communication Bus C being off. Use vehicle-specific service information to determine the applicable meaning.
Does U0091 identify a failed part?
No. The code by itself does not confirm a failed module, wire, or other component.
Can I keep driving with U0091?
The code alone is not enough to judge drivability. Consider any symptoms and warnings, follow the vehicle manual, and get a professional assessment if operation is affected.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.