Source-backed diagnostic reference

U0117 Code: Meaning & Diagnostic Guide

Lost Communication With PTO Control Module

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U0117 mean?

  • GENERIC: Lost Communication With PTO Control Module Source
  • GENERIC: Lost Communication with Drive Motor Control Module 2 Source

U0117 quick answer

U0117 is a network communication code indicating that a control module has lost communication with another module. Generic references differ on the module involved: one lists the PTO control module, while another lists Drive Motor Control Module 2. Check the vehicle-specific service information to identify the correct meaning.

Is U0117 generic or manufacturer-specific?

U0117 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U0117 works in the vehicle

U0117 belongs to the U-code family, which covers communication problems between electronic control modules. “Lost communication” means a module did not receive expected messages from another module. The supplied generic references do not agree on which module is involved, so the code alone does not confirm a particular failed part.

U0117 symptoms

Possible symptoms depend on the vehicle and the systems involved. A communication fault may turn on a warning light or affect a related feature, but the supplied evidence does not establish specific symptoms for every vehicle.

Possible causes of U0117

Possible causes include a temporary communication interruption, a wiring or connector problem, a power or ground issue, or a fault in a module. These are diagnostic possibilities, not confirmed causes of U0117.

How to diagnose U0117

  1. Confirm the code with a suitable scan tool and record any other codes and available freeze-frame information.
  2. Use vehicle-specific service information to determine which module U0117 refers to for that vehicle.
  3. Check whether the code is current or stored and whether it returns after following the manufacturer’s approved diagnostic procedure.
  4. Inspect relevant wiring and connectors for visible damage, corrosion, looseness, or water intrusion.
  5. Test related power, ground, and network circuits using the specified procedures; seek qualified help for systems involving high voltage.

How to fix U0117

Repair should follow the vehicle-specific test results rather than replacing a module based on the code alone. Correct any verified wiring, connector, power, or ground problem, and consider module diagnosis only when testing supports it. Do not attempt high-voltage repairs without appropriate training and equipment.

Can I drive with U0117?

The code alone does not establish whether the vehicle is safe to drive. Follow any dashboard warnings and the owner’s manual; if the vehicle has reduced power, abnormal operation, or a warning that calls for stopping, pull over safely and seek assistance. Arrange diagnosis if the code persists.

U0117 frequently asked questions

What does U0117 mean?

It indicates lost communication between control modules. Generic references disagree about which module is involved, so confirm the definition for the specific vehicle.

Does U0117 prove that a control module has failed?

No. It identifies a communication problem, not a confirmed failed component. Wiring, connectors, power, ground, or intermittent network issues may also need investigation.

Can I keep driving with U0117?

The code alone cannot determine that. Consider the vehicle’s behavior and warnings, follow the owner’s manual, and have a persistent code diagnosed.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.