Source-backed diagnostic reference

U0118 Code: Meaning & Diagnostic Guide

Lost Communication With Fuel Additive Control Module

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U0118 mean?

  • GENERIC: Lost Communication With Fuel Additive Control Module Source
  • GENERIC: Lost Communication with Cabin Air Quality Sensor Module Source

U0118 quick answer

U0118 is a communication-related diagnostic trouble code, but the supplied generic references disagree about which module it concerns: one names the fuel additive control module and the other the cabin air quality sensor module. Check vehicle-specific service information before drawing conclusions.

Is U0118 generic or manufacturer-specific?

U0118 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U0118 works in the vehicle

“Lost communication” means a vehicle control module did not receive expected messages from another module over the vehicle network. The code alone does not confirm which component failed. The conflicting generic descriptions mean the vehicle’s make, model, year, and manufacturer-specific code information are needed to interpret U0118 accurately.

U0118 symptoms

Depending on the vehicle and the system involved, there may be a warning light, a message, or a feature that does not work as expected. Some vehicles may show no obvious symptoms. These possibilities are not confirmed for every U0118 report.

Possible causes of U0118

Possible explanations include a temporary communication interruption, a wiring or connection issue, a power or ground problem, or a module or network fault. The code by itself does not establish a failed component or identify the cause.

How to diagnose U0118

  1. Confirm the vehicle’s make, model, year, and engine or powertrain details.
  2. Look up U0118 in vehicle-specific service information and confirm which module the code refers to.
  3. Scan all vehicle modules and record related codes and available freeze-frame information before clearing anything.
  4. Have a qualified technician check relevant power, ground, wiring, connectors, and network communication using the vehicle’s service procedures.
  5. Confirm the cause with test results before replacing a module or other parts.

How to fix U0118

The repair depends on the vehicle-specific diagnosis. A technician may need to address a connection, wiring, power supply, network issue, or module problem, but the code alone does not justify replacing a particular component. Use the correct service information and avoid attempting high-voltage repairs.

Can I drive with U0118?

U0118 alone does not establish whether a vehicle is safe to drive. Consider any warning messages, changes in vehicle behavior, or loss of an important feature, and consult the owner’s manual or a qualified technician. If the vehicle behaves abnormally or a critical system is affected, stop in a safe place and seek assistance.

U0118 frequently asked questions

What does U0118 mean?

It indicates a communication-related fault, but the supplied generic references disagree about the module involved. Vehicle-specific information is needed to identify its meaning for a particular vehicle.

Does U0118 mean a module has failed?

No. The code reports a communication problem; it does not by itself confirm that a module has failed.

Can I drive with U0118?

The code alone cannot determine whether driving is safe. Check for warnings or abnormal behavior and consult the owner’s manual or a qualified technician.

What should be checked first?

Confirm the vehicle-specific definition, then review all module codes and have relevant connections, power, ground, wiring, and network communication tested before replacing parts.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.