Source-backed diagnostic reference

U011E Code: Meaning & Diagnostic Guide

Lost Communication With Throttle Actuator B Control Module

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U011E mean?

  • GENERIC: Lost Communication With Throttle Actuator B Control Module Source
  • GENERIC: Lost Communication With Throttle Actuator B Control Module Source

U011E quick answer

U011E means “Lost Communication With Throttle Actuator B Control Module.” It indicates that a vehicle control module did not receive expected communication; it does not by itself prove that the throttle actuator module has failed.

Is U011E generic or manufacturer-specific?

U011E has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U011E works in the vehicle

U011E is a generic network communication diagnostic trouble code. “Lost communication” means modules on the vehicle network are not exchanging expected data. The code alone does not identify the cause or confirm which part needs replacement.

U011E symptoms

Depending on the vehicle and the underlying issue, possible signs may include a warning light, reduced engine power, or changes in throttle response. Some vehicles may show no obvious symptoms.

Possible causes of U011E

Possible causes include low or unstable battery voltage, a fuse or power/ground issue, damaged or disconnected wiring, a connector problem, network communication interference, or a fault in a control module. These are possibilities, not confirmed causes.

How to diagnose U011E

  1. Record all stored and pending codes and note when the code appeared.
  2. Use vehicle-specific service information to identify the modules and network involved.
  3. Check battery condition and charging-system operation before investigating communication faults.
  4. Inspect relevant fuses, wiring, grounds, and connectors for looseness, corrosion, or visible damage.
  5. Have a qualified technician test network communication and module power and ground circuits before replacing parts.

How to fix U011E

Repair should follow the confirmed cause and vehicle-specific service information. A technician may need to correct a power, ground, wiring, connector, or network issue; module replacement should not be assumed from U011E alone. Do not attempt hazardous high-voltage repairs.

Can I drive with U011E?

Driving advice depends on symptoms and vehicle guidance. If throttle response or engine power is abnormal, stop in a safe place and arrange professional assistance. If there are no noticeable symptoms, consult the owner’s manual and arrange diagnosis promptly.

U011E frequently asked questions

Does U011E mean the throttle actuator module is bad?

No. It reports lost communication with the Throttle Actuator B Control Module, but wiring, power, grounds, battery voltage, or network issues may also be involved.

Can U011E cause reduced engine power?

It may be associated with reduced power or altered throttle response on some vehicles, but symptoms vary and the code alone does not establish the cause.

What should be checked first for U011E?

Record related codes, check battery and charging-system condition, and inspect the relevant fuses, connections, wiring, and grounds using vehicle-specific service information.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.