Source-backed diagnostic reference

U0133 Code: Meaning & Diagnostic Guide

Lost Communication With Active Roll Control Module

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U0133 mean?

  • GENERIC: Lost Communication With Active Roll Control Module Source
  • GENERIC: Lost Communication with Yaw Rate Sensor Module Source

U0133 quick answer

U0133 is a communication fault code. Generic references describe it as lost communication with either an Active Roll Control Module or a Yaw Rate Sensor Module, so the exact meaning depends on the vehicle and its diagnostic information.

Is U0133 generic or manufacturer-specific?

U0133 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U0133 works in the vehicle

The U prefix generally indicates a vehicle-network communication issue. U0133 means a control module has reported that it cannot communicate with a module associated with this code; the supplied generic references disagree about which module.

U0133 symptoms

Depending on the vehicle and systems involved, possible signs may include warning lights or unavailable stability or roll-control features. The code alone does not confirm any particular symptom or failed part.

Possible causes of U0133

Possible causes of a communication fault can include a power or ground issue, wiring or connector trouble, network disruption, or a module fault. The supplied evidence does not establish a specific cause.

How to diagnose U0133

  1. Check the vehicle-specific service information to determine what U0133 refers to for that vehicle.
  2. Scan all relevant modules and record codes and available status details before clearing anything.
  3. Check whether the code is current or stored and whether other communication codes are present.
  4. Following vehicle-specific procedures, inspect relevant fuses, power and ground connections, wiring, and connectors.
  5. Confirm the cause with appropriate diagnostic tests before replacing parts.

How to fix U0133

Repair depends on the confirmed cause and the vehicle-specific definition. Do not replace a module based on U0133 alone; have a qualified technician diagnose the communication circuit and verify the repair.

Can I drive with U0133?

The code alone cannot determine whether the vehicle is safe to drive. If warning lights, handling changes, or unavailable stability features occur, stop when safe and seek professional assessment. Consult the owner's manual for vehicle-specific guidance.

U0133 frequently asked questions

What does U0133 mean?

It indicates lost communication, but generic references disagree on whether the affected module is an Active Roll Control Module or a Yaw Rate Sensor Module.

Does U0133 identify a failed module?

No. It reports a communication problem and does not by itself confirm that a module has failed.

Can I drive with U0133?

The code alone does not establish whether driving is safe. Consider any warning lights or handling changes, and follow the owner's manual or seek professional advice.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.