Source-backed diagnostic reference

U0134 Code: Meaning & Diagnostic Guide

Lost Communication With Power Steering Control Module - Rear

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U0134 mean?

  • GENERIC: Lost Communication With Power Steering Control Module - Rear Source
  • GENERIC: Lost Communication with Restraints System Sensor (Side Sensor) Source

U0134 quick answer

U0134 is a communication fault code, but generic references disagree about which module it involves. They describe lost communication with either the rear power steering control module or a side restraint-system sensor. The code alone does not identify a failed part.

Is U0134 generic or manufacturer-specific?

U0134 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U0134 works in the vehicle

U0134 is a network-related diagnostic trouble code. “Lost communication” means a vehicle module did not receive expected messages from another module. The module associated with this code can vary by vehicle or code source, so check the vehicle-specific service information and scan-tool data before interpreting it.

U0134 symptoms

Possible signs depend on the vehicle and the module involved. They may include a warning light or message, a stored communication code, or changes in steering-assist or restraint-system operation. Some vehicles may show no obvious symptoms.

Possible causes of U0134

Possible causes include a temporary low-voltage or network interruption, a wiring or connector issue, a power or ground problem, or a module fault. These are possibilities, not confirmed causes; U0134 alone does not prove that a module has failed.

How to diagnose U0134

  1. Confirm the vehicle’s year, make, model, and exact code details; consult vehicle-specific service information because generic definitions conflict.
  2. Scan all available modules and record related codes and status before clearing anything.
  3. Check battery and charging-system condition and look for other codes that may explain a communication interruption.
  4. Have a qualified technician inspect relevant module power, grounds, connectors, and wiring using the correct service procedures.
  5. Use the vehicle-specific diagnostic procedure to determine whether the issue is intermittent, wiring-related, or module-related before replacing parts.

How to fix U0134

Repair should follow the confirmed diagnosis. Depending on test results, this may involve addressing a power, ground, connector, wiring, or network issue. Replace or reprogram a module only when vehicle-specific testing supports that repair. Do not attempt high-voltage repairs based on this code.

Can I drive with U0134?

U0134 alone does not establish whether the vehicle is safe to drive. If steering assist seems reduced or a restraint-system warning is present, consult the owner’s manual and arrange prompt professional inspection; stop in a safe place if control or vehicle behavior is affected.

U0134 frequently asked questions

Does U0134 identify a failed module?

No. It indicates a reported communication loss, and the code alone does not confirm which component or circuit caused it.

Why do U0134 definitions differ?

The supplied generic references associate the code with different modules. Vehicle-specific service information is needed to identify the applicable definition.

Can I clear U0134 and keep driving?

Clearing the code does not fix its cause. Record the codes first, and seek inspection if warning lights, steering changes, or restraint-system concerns are present.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.