Source-backed diagnostic reference

U013C Code: Meaning & Diagnostic Guide

Lost Communication With Accelerator Pedal Module

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U013C mean?

  • GENERIC: Lost Communication With Accelerator Pedal Module Source
  • GENERIC: Lost Communication With Accelerator Pedal Module Source

U013C quick answer

U013C is a generic diagnostic trouble code meaning “Lost Communication With Accelerator Pedal Module.” It indicates that a vehicle control module has detected a communication loss; it does not, by itself, confirm that the accelerator pedal module has failed.

Is U013C generic or manufacturer-specific?

U013C has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U013C works in the vehicle

U013C is a network communication code. In plain language, the vehicle’s electronic systems are not receiving expected messages from the accelerator pedal module. Vehicle equipment and code behavior can vary, so confirm the code definition and system layout for the specific vehicle.

U013C symptoms

Depending on the vehicle and the cause, there may be a warning light, reduced or irregular accelerator response, or no noticeable symptom. These are possibilities, not symptoms established by the code alone.

Possible causes of U013C

Possible causes include a temporary communication interruption, a wiring or connector problem, a power or ground issue, or a fault in a related control module. U013C alone does not identify which cause applies.

How to diagnose U013C

  1. Confirm U013C with a suitable scan tool and note any other stored codes and available freeze-frame information.
  2. Check the vehicle’s service information for the code definition, module layout, and diagnostic procedure.
  3. Have a qualified technician inspect relevant wiring and connectors for visible damage, looseness, or corrosion.
  4. Test applicable power, ground, and communication circuits using the vehicle-specific procedure.
  5. Clear the code only after documenting it, then check whether it returns and reassess the vehicle’s symptoms.

How to fix U013C

The correct repair depends on the confirmed cause. Address verified wiring, connector, power, ground, or communication faults before considering module replacement. Do not replace the accelerator pedal module based on U013C alone.

Can I drive with U013C?

The code alone cannot establish whether the vehicle is safe to drive. If accelerator response is abnormal, a warning indicates reduced power, or the vehicle is difficult to control, stop driving when safe and arrange professional assistance. If there are no symptoms, consult vehicle-specific guidance and have the code diagnosed promptly.

U013C frequently asked questions

What does U013C mean?

U013C means “Lost Communication With Accelerator Pedal Module.” It reports a communication problem, not a confirmed failed part.

Does U013C mean the accelerator pedal module needs replacement?

No. Wiring, connectors, power or ground, communication faults, or other issues may be involved. Diagnosis is needed before replacing a component.

Can I drive with U013C?

The code alone does not determine drivability. If accelerator response is abnormal or the vehicle is difficult to control, stop when safe and seek professional help.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.