Source-backed diagnostic reference

U013E Code: Meaning & Diagnostic Guide

Lost Communication With Vacuum Sensor B

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U013E mean?

  • GENERIC: Lost Communication With Vacuum Sensor B Source
  • GENERIC: Lost Communication With Vacuum Sensor B Source

U013E quick answer

U013E is a generic diagnostic trouble code meaning “Lost Communication With Vacuum Sensor B.” It indicates that a vehicle control module is not receiving expected communication from a component identified as Vacuum Sensor B; it does not by itself confirm which part has failed.

Is U013E generic or manufacturer-specific?

U013E has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U013E works in the vehicle

U013E is a network communication code. “Lost communication” means that a module did not receive expected messages, while “Vacuum Sensor B” is the component label used in the generic code description. The sensor’s location and exact role can vary by vehicle, so check vehicle-specific service information.

U013E symptoms

Depending on the vehicle and the systems involved, a warning light or other unusual behavior may occur, or there may be no obvious symptom. The code alone does not establish what symptoms to expect.

Possible causes of U013E

Possible causes include an issue with the sensor or its connector, wiring, power or ground supply, or the vehicle communication network. The code does not identify a confirmed failed component.

How to diagnose U013E

  1. Confirm U013E with a compatible scan tool and record any other stored codes and available freeze-frame information.
  2. Use vehicle-specific service information to identify Vacuum Sensor B and the modules involved; do not assume its location from the code alone.
  3. Check for related codes that may help distinguish a sensor, wiring, power-supply, or communication issue.
  4. Have accessible connectors and wiring inspected for damage, looseness, or corrosion.
  5. If the cause is not clear, have a qualified technician test the relevant circuits and communication system using the vehicle maker’s procedures.

How to fix U013E

Repair should follow the test results. A wiring or connection problem may need attention, while sensor replacement is appropriate only if testing confirms it. Avoid replacing parts based on U013E alone, and use a qualified technician for electrical diagnosis when needed.

Can I drive with U013E?

The code alone cannot determine whether the vehicle is safe to drive. Consider warning lights, changes in vehicle behavior, and vehicle-specific guidance; seek professional assessment if the vehicle behaves unusually or you are unsure.

U013E frequently asked questions

What does U013E mean?

It is a generic code for lost communication with Vacuum Sensor B.

Does U013E prove that the vacuum sensor has failed?

No. The code reports a communication loss and does not confirm whether the sensor, its wiring, its power supply, or another part of the communication path is responsible.

Can I clear U013E and ignore it?

Clearing the code does not identify or repair its cause. Record the codes first and have the issue checked if it returns or the vehicle shows unusual behavior.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.