Source-backed diagnostic reference

U016C Code: Meaning & Diagnostic Guide

Lost Communication With Fuel Pump Control Module B

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U016C mean?

  • GENERIC: Lost Communication With Fuel Pump Control Module B Source
  • GENERIC: Lost Communication With Fuel Pump Control Module B Source

U016C quick answer

U016C is a generic diagnostic trouble code meaning “Lost Communication With Fuel Pump Control Module B.” It indicates that a vehicle control module did not receive expected communication from that module; it does not, by itself, confirm which part has failed.

Is U016C generic or manufacturer-specific?

U016C has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U016C works in the vehicle

U016C is a network communication code. “Lost communication” means a module expected a message but did not receive it. The code description identifies the message source as Fuel Pump Control Module B, but the exact module layout and diagnostic procedure can vary by vehicle.

U016C symptoms

Depending on the vehicle and the underlying issue, there may be a warning light, fuel-system-related symptoms, starting difficulty, or no obvious symptom. The code alone does not establish that any of these are present.

Possible causes of U016C

Possible explanations include a temporary communication interruption, a power or ground issue, damaged wiring or connectors, a network fault, or a problem with a control module. These are possibilities to investigate, not confirmed causes.

How to diagnose U016C

  1. Record all stored codes and available freeze-frame data before clearing anything; related codes can help narrow the issue.
  2. Check the vehicle-specific service information to confirm how Fuel Pump Control Module B is identified and which circuits and network apply.
  3. Check relevant fuses and inspect accessible wiring and connectors for looseness, corrosion, or damage, following the service information.
  4. Have a qualified technician test module power, ground, and network communication using vehicle-specific procedures.
  5. Clear the code only after documenting it, then check whether it returns and reassess any symptoms.

How to fix U016C

The repair depends on the confirmed cause. A technician may need to address a circuit, connector, power or ground supply, network issue, or module fault. Do not replace a module based on U016C alone; use vehicle-specific test results.

Can I drive with U016C?

The code alone cannot determine whether the vehicle is safe to drive. If the vehicle has starting, stalling, or other significant operating problems, avoid driving and seek professional assistance. If it runs normally, consult vehicle-specific guidance and arrange diagnosis promptly.

U016C frequently asked questions

Does U016C prove the fuel pump control module has failed?

No. It reports lost communication with Fuel Pump Control Module B, but wiring, power, ground, network, or other issues may also explain the code.

Can U016C cause a no-start?

A no-start may occur in some circumstances, but the code description alone does not establish that it is the cause.

Should I clear U016C before diagnosis?

Record the code and any related data first. Clearing it may remove useful diagnostic information; if it is cleared, check whether it returns.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.