Source-backed diagnostic reference

U01B7 Code: Meaning & Diagnostic Guide

Lost Communication With Switch Input Module “A”

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U01B7 mean?

  • GENERIC: Lost Communication With Switch Input Module “A” Source
  • GENERIC: Lost Communication With Switch Input Module A Source

U01B7 quick answer

U01B7 is a generic diagnostic trouble code meaning the vehicle has lost communication with Switch Input Module A.

Is U01B7 generic or manufacturer-specific?

U01B7 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U01B7 works in the vehicle

This is a network communication code. It indicates that another vehicle module did not receive expected messages from Switch Input Module A. The code alone does not identify why communication was lost or confirm that the module itself has failed.

U01B7 symptoms

Depending on the vehicle and which functions use this module, possible context may include switch-related features that behave unexpectedly or a warning light. A stored code may also appear without an obvious symptom.

Possible causes of U01B7

Possible causes include a temporary network interruption, an issue with the module's power or ground, damaged wiring or connectors, or a module fault. The code by itself does not establish any of these as the cause.

How to diagnose U01B7

  1. Use a compatible scan tool to check whether U01B7 is current, pending, or stored, and note any related codes.
  2. Check vehicle-specific service information to identify Switch Input Module A and its network, power, and ground circuits.
  3. Inspect accessible related wiring and connectors for looseness, corrosion, or damage.
  4. Have a qualified technician test the relevant power, ground, and communication circuits using the vehicle's service procedures.
  5. Clear the code only after recording it, then recheck for recurrence and confirm whether the reported symptoms remain.

How to fix U01B7

Repair should follow the cause found during diagnosis. This may involve addressing a connection or circuit issue; replacing a module should not be assumed from U01B7 alone. Consult vehicle-specific service information or a qualified technician.

Can I drive with U01B7?

The code alone cannot determine whether the vehicle is safe to drive. Consider any warning lights or affected functions, and seek prompt professional advice if important controls or vehicle functions are impaired.

U01B7 frequently asked questions

What does U01B7 mean?

It means communication was lost with Switch Input Module A, according to the generic code definition.

Does U01B7 prove the module is faulty?

No. The code identifies a communication loss, not a confirmed failed component.

Can U01B7 be diagnosed the same way on every vehicle?

No. The definition is generic, but module locations, circuits, and diagnostic procedures vary by vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.