Source-backed diagnostic reference

U0413 Code: Meaning & Diagnostic Guide

Invalid Data Received From Battery Energy Control Module B

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U0413 mean?

  • GENERIC: Invalid Data Received From Battery Energy Control Module B Source
  • GENERIC: Invalid Data Received from Wheel Speed Sensor (Rear, Driver Side) Source

U0413 quick answer

U0413 generally indicates that a vehicle module received data it considers invalid, but the reported source is inconsistent across the supplied generic references. One identifies Battery Energy Control Module B; another identifies the rear driver-side wheel speed sensor. Check vehicle-specific service information before diagnosing either system.

Is U0413 generic or manufacturer-specific?

U0413 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U0413 works in the vehicle

U0413 is a network-related diagnostic trouble code. “Invalid data received” means a control module detected information from another module or sensor that did not meet its expected checks. The code alone does not confirm which component failed. The supplied references disagree about the data source, so the correct interpretation depends on the vehicle.

U0413 symptoms

Depending on the vehicle and affected system, there may be warning lights, a stored code with no obvious symptom, or changes in related functions. The code alone does not establish which symptoms should occur.

Possible causes of U0413

Possibilities include incorrect or inconsistent data, a communication or wiring issue, a connector problem, or a fault in a relevant sensor or control module. These are diagnostic possibilities, not confirmed causes for a particular vehicle.

How to diagnose U0413

  1. Record the vehicle year, make, model, powertrain, and all stored codes, including which module reported U0413.
  2. Use vehicle-specific service information to confirm what U0413 means for that vehicle; do not choose between the conflicting generic descriptions by code number alone.
  3. Review related codes and available freeze-frame data to see which system reported the issue and under what conditions.
  4. If service information points to a particular circuit, inspect its accessible wiring and connectors for damage, looseness, or corrosion.
  5. Follow the manufacturer’s diagnostic procedure or have a qualified technician test the relevant system before replacing parts.

How to fix U0413

The appropriate repair depends on the vehicle-specific diagnosis. Address any confirmed wiring, connector, sensor, or module issue according to service information, then clear the code and verify whether it returns. Do not replace a battery energy control module or wheel speed sensor based on U0413 alone. High-voltage system diagnosis or repair should be left to appropriately trained technicians.

Can I drive with U0413?

U0413 alone does not establish whether a vehicle is safe to drive. Check for warning lights, changes in braking or handling, or powertrain concerns. If these occur, stop driving when safe and seek qualified assistance; otherwise, arrange diagnosis promptly and follow the vehicle’s owner guidance.

U0413 frequently asked questions

What does code U0413 mean?

It generally indicates invalid data received over the vehicle network, but the supplied generic references disagree about whether the source is Battery Energy Control Module B or the rear driver-side wheel speed sensor. Vehicle-specific information is needed.

Does U0413 identify a failed part?

No. It reports a data or communication concern and does not, by itself, confirm that a sensor, control module, or wiring has failed.

Can I drive with U0413?

The code alone cannot determine drivability. Consider any warning lights or changes in braking, handling, or powertrain behavior, and consult the owner guidance or a qualified technician.

Should I replace the wheel speed sensor or battery control module?

Not without vehicle-specific diagnosis. The generic references conflict, and U0413 alone does not confirm either component is faulty.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.