Source-backed diagnostic reference

U042C Code: Meaning & Diagnostic Guide

Invalid Data Received From Chassis Control Module B

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U042C mean?

  • GENERIC: Invalid Data Received From Chassis Control Module B Source
  • GENERIC: Invalid Data Received From Chassis Control Module B Source

U042C quick answer

U042C means “Invalid Data Received From Chassis Control Module B.” It indicates that a vehicle control system received data it considers invalid from a module identified as Chassis Control Module B; it does not, by itself, identify the cause.

Is U042C generic or manufacturer-specific?

U042C has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U042C works in the vehicle

U042C is a network communication diagnostic trouble code. “Invalid data” means information received from another module did not meet the receiving system’s expectations. The code alone does not confirm that the chassis control module has failed.

U042C symptoms

Symptoms depend on the vehicle and which systems are affected. A warning light or message, or changes in a chassis-related feature, may occur, but some vehicles may show no obvious symptoms.

Possible causes of U042C

Possible causes can include a communication or wiring issue, a connector problem, power or ground trouble, inconsistent data from another system, or a module fault. The code alone cannot distinguish among these possibilities.

How to diagnose U042C

  1. Record all stored and pending codes, along with any available freeze-frame or scan-tool information.
  2. Check vehicle-specific service information to identify the systems involved and the correct diagnostic procedure.
  3. Look for related communication, power, or chassis-system codes; diagnose those findings in context.
  4. Have a qualified technician check relevant wiring, connectors, module power and grounds, and network communication.
  5. Confirm the cause with test results before replacing or programming any module.

How to fix U042C

The repair depends on the confirmed cause. Address verified wiring, connector, power, ground, or communication problems as appropriate. Replace or program a module only when testing and vehicle-specific procedures support that diagnosis.

Can I drive with U042C?

The code alone does not establish whether the vehicle is safe to drive. If warning messages, unusual handling, or loss of a chassis-related feature occur, stop when safe and seek professional advice. Consult the owner’s manual for vehicle-specific warnings.

U042C frequently asked questions

Does U042C confirm that Chassis Control Module B has failed?

No. It indicates that invalid data was received from the module; further diagnosis is needed to determine why.

Can U042C appear without noticeable symptoms?

Yes. Symptoms vary by vehicle and affected system, and may not be obvious.

Should the module be replaced when U042C appears?

Not based on the code alone. Check related codes and test the relevant circuits and communication before considering module replacement.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.