Source-backed diagnostic reference

U045E Code: Meaning & Diagnostic Guide

Invalid Data Received From Automated Driving System Control Module B

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U045E mean?

  • GENERIC: Invalid Data Received From Automated Driving System Control Module B Source
  • GENERIC: Invalid Data Received From Automated Driving System Control Module B Source

U045E quick answer

U045E is a generic network diagnostic trouble code meaning “Invalid Data Received From Automated Driving System Control Module B.” It indicates that a vehicle module received data it considered invalid; it does not, by itself, identify the cause or confirm a failed component.

Is U045E generic or manufacturer-specific?

U045E has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U045E works in the vehicle

U045E is a communication-related code. “Invalid data received” means information arriving over the vehicle’s electronic network did not pass the receiving module’s checks. The code names Automated Driving System Control Module B as the stated data source, but the code alone does not show why the data was invalid.

U045E symptoms

There is no symptom information established by the supplied code definition. Depending on the vehicle and its systems, a related warning or unavailable feature may occur, but this code alone does not confirm either.

Possible causes of U045E

The code definition does not establish a cause. Possible areas for a technician to investigate include network communication, power or ground supply, wiring or connectors, or a module or software issue. None is confirmed by U045E alone.

How to diagnose U045E

  1. Record U045E and any other stored codes, including which modules reported them and whether they are current or historical.
  2. Use service information and diagnostic procedures specific to the vehicle to interpret the code and identify the relevant network checks.
  3. Have a qualified technician check for related communication, power, ground, wiring, or connector issues before considering module replacement.
  4. Clear codes only after documenting them, then follow vehicle-specific procedures to see whether U045E returns.

How to fix U045E

Do not replace a module based on U045E alone. The appropriate repair depends on diagnostic findings and vehicle-specific service information. High-voltage or automated-driving-system work should be left to qualified technicians using the required procedures.

Can I drive with U045E?

The code alone does not establish whether the vehicle is safe or unsafe to drive. If an automated-driving or driver-assistance warning appears, follow the owner’s manual, do not rely on the affected feature, and arrange an assessment by a qualified repair facility.

U045E frequently asked questions

What does U045E mean?

It means invalid data was received from Automated Driving System Control Module B, according to the generic code definition.

Does U045E prove that the control module has failed?

No. The code identifies invalid received data, not a confirmed failed component or root cause.

Can I diagnose U045E without vehicle-specific information?

The generic definition is a starting point. Detailed checks and repair decisions require service information for the specific vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.