Source-backed diagnostic reference

U046E Code: Meaning & Diagnostic Guide

Invalid Data Received From Exhaust Gas Sensor Module B

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U046E mean?

  • GENERIC: Invalid Data Received From Exhaust Gas Sensor Module B Source
  • GENERIC: Invalid Data Received From Exhaust Gas Sensor Module B Source

U046E quick answer

U046E means a vehicle control module has received invalid data from Exhaust Gas Sensor Module B. The code identifies a data problem, not a confirmed failed sensor or module.

Is U046E generic or manufacturer-specific?

U046E has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U046E works in the vehicle

U046E is a generic diagnostic trouble code in the network (U-code) category. “Invalid data received” means the reported information did not appear valid to the module that stored the code. The code alone does not identify why the data was invalid.

U046E symptoms

Symptoms are not specified by the code reference and may vary by vehicle. A warning light or other drivability or emissions-related concern may be present, but U046E alone does not confirm any particular symptom.

Possible causes of U046E

Possible explanations require vehicle-specific diagnosis. The code does not establish that Exhaust Gas Sensor Module B, a sensor, wiring, or another component has failed.

How to diagnose U046E

  1. Record all stored and pending codes and note any available freeze-frame data before clearing codes.
  2. Check the vehicle’s service information for the exact meaning of Exhaust Gas Sensor Module B and the correct diagnostic procedure.
  3. Review related codes and inspect relevant connectors and wiring for visible damage or poor connections, following the vehicle’s service instructions.
  4. Use appropriate scan-tool tests and vehicle-specific procedures to determine whether the reported data problem is current or intermittent.
  5. Confirm the cause before replacing parts, then clear codes and verify the repair according to service information.

How to fix U046E

U046E does not point to one confirmed repair. Diagnosis may lead to correcting a connection or wiring issue, addressing a module or sensor problem, or another vehicle-specific remedy. Avoid replacing parts based on the code alone; consult a qualified technician if the cause is unclear.

Can I drive with U046E?

The code by itself does not establish whether the vehicle is safe to drive. Follow the owner’s manual and seek prompt professional advice if warning lights, unusual behavior, or drivability problems occur.

U046E frequently asked questions

What does U046E mean?

It means a control module received data it judged invalid from Exhaust Gas Sensor Module B.

Does U046E prove that the exhaust gas sensor module has failed?

No. It describes invalid data and does not confirm which component or condition caused it.

Can U046E be diagnosed without other information?

The code provides a starting point, but diagnosis generally requires the vehicle details, related codes, and manufacturer-specific service information.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.