Source-backed diagnostic reference

U058A Code: Meaning & Diagnostic Guide

Invalid Data Received From DC/AC Converter Control Module B

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does U058A mean?

  • GENERIC: Invalid Data Received From DC/AC Converter Control Module B Source
  • GENERIC: Invalid Data Received From DC/AC Converter Control Module B Source

U058A quick answer

U058A is a generic diagnostic trouble code meaning “Invalid Data Received From DC/AC Converter Control Module B.” It indicates that a vehicle control module received data it considers invalid; it does not, by itself, identify a failed part.

Is U058A generic or manufacturer-specific?

U058A has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How U058A works in the vehicle

U058A is a network communication code. “Invalid data” means information received from DC/AC Converter Control Module B did not meet the receiving module’s expectations. The code alone does not confirm why this happened or which component is at fault.

U058A symptoms

There may be no noticeable symptoms, or warning lights, messages, or system behavior changes may occur depending on the vehicle and the affected systems. The code description alone does not establish which symptoms apply.

Possible causes of U058A

Possible causes to investigate include intermittent communication, a connection or wiring problem, a power or ground issue, or a problem with a control module. These are possibilities, not confirmed causes; vehicle-specific diagnostic information is needed.

How to diagnose U058A

  1. Record U058A and any other stored codes, including which modules reported them and whether they are current or intermittent.
  2. Use service information and a scan tool appropriate for the vehicle to check related module data and communication faults.
  3. Check for applicable manufacturer diagnostic guidance for the specific vehicle; the generic code definition does not establish vehicle or manufacturer applicability.
  4. Have a qualified technician inspect relevant low-voltage wiring, connectors, power, and grounds using the vehicle’s service procedures.
  5. Do not replace a module based on U058A alone; confirm the fault and its cause before repairs.

How to fix U058A

The repair depends on the confirmed cause. A technician may need to address a connection, wiring, power, ground, or module issue, but U058A alone does not identify which repair is needed. Follow vehicle-specific procedures, especially where high-voltage systems may be involved.

Can I drive with U058A?

The code alone cannot determine whether the vehicle is safe to drive. Follow any vehicle warnings or operating instructions, and seek qualified service if warnings, loss of function, or abnormal behavior occur. Do not handle high-voltage components.

U058A frequently asked questions

What does U058A mean?

It means invalid data was received from DC/AC Converter Control Module B. It does not identify a failed component by itself.

Does U058A prove that the converter control module is bad?

No. The code reports invalid received data, but the cause must be diagnosed; it does not prove that the module has failed.

Can I keep driving with U058A?

The code alone is not enough to determine that. Consider any warning messages or changes in vehicle behavior and consult a qualified technician or the vehicle’s operating guidance.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.